Technical data

5–80 Event Reporting: Templates and Codes
080D0100 Could not get enough memory to build a FCB to reply to a request from the other controller.
080E0101 An out-of-range receiver ID was received by the NVFOC communication utility (master send to
slave send ACK). Last Failure Parameter[0] contains the bad id value.
080F0101 An out-of-range receiver ID was received by the NVFOC communication utility (received by
master). Last Failure Parameter[0] contains the bad id value.
08100101 A call to NVFOC$TRANSACTION had a from field (id) that was out of range for the NVFOC
communication utility.
■ Last Failure Parameter [0] contains the bad id value.
08110101 NVFOC tried to defer more than one FOC send. Last Failure Parameter[0] contains the master ID
of the connection that had the multiple delays.
08140100 Could not allocate memory to build a workblock to queue to the NVFOC thread.
08160100 A request to clear the remote configuration was received but the memory was not locked.
08170100 A request to read the next configuration was received but the memory was not locked.
08180100 Could not get enough memory for FLS FCBs to receive information from the other controller.
08190100 An unlock command was received when the NV memory was not locked.
081A0100 Unable to allocate memory for remote work.
081B0101 Bad remote work received on remote work queue.
■ Last Failure Parameter[0] contains the id type value that was received on the NVFOC
remote work queue.
081C0101 Bad member management work received.
■ Last Failure Parameter[0] contains the bad member management value that was
detected.
081D0000 In order to go into mirrored cache mode, the controllers must be restarted.
081E0000 In order to go into nonmirrored cache mode, the controllers must be restarted.
081F0000 An FLM$INSUFFICIENT_RESOURCES error was returned from a FLM lock or unlock call.
Table 5–3 Last Failure Codes (Continued)
Code Description