Technical data

5–81
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
08200000 Expected restart so the write_instance may recover from a configuration mismatch.
08210100 Unable to allocate memory to setup NVFOC lock/unlock notification routines.
09010100 Unable to acquire memory to initialize the FLM structures.
09640101 Work that was not FLM work was found on the FLM queue. Bad format is detected or the
formatted string overflows the output buffer.
■ Last Failure Parameter [0] contains the work found.
09650101 Work that was not FLM work was found on the FLM queue.
■ Last Failure Parameter [0] contains the structure found.
09670101 Local FLM detected an invalid facility to act upon.
■ Last Failure Parameter [0] contains the faciltiy found.
09680101 Remote FLM detected an error and requested the local controller to restart.
■ Last Failure Parameter [0] contains the reason for the request.
09C80101 Remote FLM detected an invalid facility to act upon.
■ Last Failure Parameter [0] contains the facility found.
09C90101 Remote FLM detected an invalid work type.
■ Last Failure Parameter [0] contains the work type found.
09CA0101 Remote FLM detected an invalid work type.
■ Last Failure Parameter [0] contains the work type found.
09CB0012 Remote FLM detected that the other controller has a facility lock manager at an incompatible
revision level with this controller.
■ Last Failure Parameter [0] contains the controller’s FLM revision.
■ Last Failure Parameter [1] contains the other controller’s FLM revision.
0A020100 ILF$CACHE_READY unable to allocate necessary DWDs.
0A030100 ILF$CACHE_READY buffers_obtained > non-zero stack entry count.
Table 5–3 Last Failure Codes (Continued)
Code Description