Technical data

5–86 Event Reporting: Templates and Codes
12070102 vsi_ptr->allocated_this not set.
■ Last Failure Parameter [0] contains the ASSUME instance address.
■ Last Failure Parameter [1] contains nv_index value.
12080102 vsi_ptr->cs_interlocked not set.
■ Last Failure Parameter [0] contains the ASSUME instance address.
■ Last Failure Parameter [1] contains nv_index value.
12090102 Unhandled switch case.
■ Last Failure Parameter [0] contains the ASSUME instance address.
■ Last Failure Parameter [1] contains the switch value.
20010100 The action for work on the CLI queue should be CLI_CONNECT, CLI_COMMAND_IN or
CLI_PROMPT. If it isn’t one of these three, this bugcheck will result.
20020100 The FAO returned a non-successful response. This will only happen if a bad format is detected
or the formatted string overflows the output buffer.
20030100 The type of work received on the CLI work queue wasn’t of type CLI.
20060100 A work item of an unknown type was placed on the CLI’s SCSI Virtual Terminal thread’s work
queue by the CLI.
20080000 This controller requested this controller to restart.
20090010 This controller requested this controller to shutdown.
200A0000 This controller requested this controller to selftest.
200B0100 Could not get enough memory for FCBs to receive information from the other controller.
200D0101 After many calls to DS$PORT_BLOCKED, we never got a FALSE status back (which signals that
nothing is blocked).
■ Last Failure Parameter[0] contains the port number (1 - n) that we were waiting on to be
unblocked.
Table 5–3 Last Failure Codes (Continued)
Code Description