Technical data

5–87
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
200E0101 While traversing the structure of a unit, a config_info node was discovered with an
unrecognized structure type.
Last Failure Parameter[0] contains the structure type number that was unrecognized.
200F0101 A config_info node was discovered with an unrecognized structure type.
Last Failure Parameter[0] contains the structure type number that was unrecognized.
20100101 A config_node of type VA_MA_DEVICE had an unrecognized SCSI device type.
Last Failure Parameter[0] contains the SCSI device type number that was unrecognized.
20110100 An attempt to allocate memory so the CLI prompt messages could be deleted failed.
20120101 While traversing the structure of a unit, a config_info node was discovered with an
unrecognized structure type.
Last Failure Parameter[0] contains the structure type number that was unrecognized.
20130101 While traversing the structure of a unit, the device was of an unrecognized type.
Last Failure Parameter[0] contains the SCSI device type that was unrecognized.
20150100 On failover, both controllers must be restarted for failover to take effect. This is how this
controller is restarted in COPY=OTHER.
20160000 In order to go into mirrored cache mode, the controllers must be restarted.
20160100 Unable to allocate resources needed for the CLI local program.
20170000 In order to go into unmirrored cache mode, the controllers must be restarted.
20190010 A cache state of a unit remains WRITE_CACHE_UNWRITTEN_DATA. The unit is not ONLINE, thus
this state would only be valid for a very short period of time.
201A0100 An attempt to allocate memory so a CLI prompt message could be reformatted failed.
201B0100 Insufficient resources to get memory to lock CLI.
201C0100 Insufficient resources to get memory to unlock CLI.
201E0101 CLI$ALLOCATE_STRUCT() was called by a process which it does not support
Last Failure Parameter [0] contains pscb address.
Table 5–3 Last Failure Codes (Continued)
Code Description