Technical data

5–89
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
431A0100 Unable to allocate necessary timer memory in HPP_int().
43210101 HPP detected unknown error indicated by HPT.
■ Last Failure Parameter [0] contains the error value.
43220100 Unable to obtain Free CSR in HPP().
43230101 During processing to maintain consistency of the data for Persistent Reserve SCSI commands,
an internal inconsistency was detected.
■ Last Failure Parameter [0] contains a code defining the precise nature of the
inconsistency.
440C0100 No available Abort Records to process abort request.
440D0100 No available FOR Records to process Failover request.
440E0100 Unable to allocate the necessary number of HTBS in hpt_init ().
44110100 Unable to allocate the necessary memory for abort records in hpt_init ().
44136904 Interrupt from SCSI host port chip indicated condition that is not handled (unexpected).
■ Last Failure Parameter [0] contains ISTAT Register.
■ Last Failure Parameter [1] contains DSTAT Register.
■ Last Failure Parameter [2] contains SIEN/SIST Registers.
■ Last Failure Parameter [3] contains Chip Register Base.
44146904 Interrupt from SCSI host port chip indicated ATN condition at unexpected script location.
■ Last Failure Parameter [0] contains ISTAT Register.
■ Last Failure Parameter [1] contains DSTAT Register.
■ Last Failure Parameter [2] contains Script PC (DSP).
■ Last Failure Parameter [3] contains Chip Register Base.
Table 5–3 Last Failure Codes (Continued)
Code Description