Technical data

5–94 Event Reporting: Templates and Codes
8A040080 New cache module failed diagnostics. The controller has been reset to clear the error.
8A050080 Could not initialize new cache module. The controller has been reset to clear the error.
8B000186 A single bit error was found by software scrubbing.
■ Last Failure Parameter [0] contains the address of the first single bit ecc error found.
■ Last Failure Parameter [1] contains the count of single bit ecc errors found in the same
region below this address.
■ Last Failure Parameter [2] contains the lower 32-bits of the actual data read at the
Parameter [0] address.
■ Last Failure Parameter [3] contains the higher 32-bits of the actual data read at the
Parameter [0] address.
■ Last Failure Parameter [4] contains the lower 32-bits of the expected data read at the
Parameter [0] address.
■ Last Failure Parameter [5] contains the higher 32-bits of the expected data read at the
Parameter [0] address.
Table 5–3 Last Failure Codes (Continued)
Code Description