Technical data
2–6
Replacement Procedures
1. Press the battery-disable switch located on each battery within the ECB SBB.
The switch is the small button labeled SHUT OFF next to the status LED (see
Figure 2–2). Press each switch for approximately five seconds. The status LED
will flash once and then shut off. Make sure you perform this procedure on both
ECB 1 and ECB 2, if appropriate.
2. The batteries are no longer powering the cache module.
Figure 2–2. ECB SBB Battery Disable Switch Location
Table 2–2 Description of ECB SBB Battery Disable Switch
Location Description
➀ External Cache Battery 1
➁ External Cache Battery 2
➂ Power connector
➃ Status LED
➄ Battery disable switch
CXO6164B
1
4
5
2
3