Technical data

2–15
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
6. If not already connected, connect a PC or terminal to the controller’s
maintenance port.
7. Restart the controller by pressing its reset button.
8. When the CLI prompt reappears, display details about the controller you
configured. Use the following command:
SHOW THIS_CONTROLLER FULL
9. Mount the logical units on the host. If you are using a Windows NT platform,
restart the server.
10. Set the subsystem date and time with the following command:
SET THIS_CONTROLLER TIME= dd-mmm-yyyy:hh:mm:ss
11. Disconnect the PC or terminal from the controller’s maintenance port.