Technical data

2–44 Replacement Procedures
5. Enter option 3, Replace a PVA module from the FRUTIL Main menu. FRUTIL
displays the PVA Replacement menu:
FRUTIL PVA Replacement Menu:
1. Master Enclosure (ID 0)
2. First Expansion Enclosure (ID 2)
3. Second Expansion Enclosure (ID 3)
4. Exit
Enter Choice: 1, 2, 3, or 4 ->
NOTE: The HSZ80 controller supports up to three enclosures. The FRUTIL PVA
Replacement Menu has options for three enclosures regardless of how many
enclosures are connected.
6. Enter option 1, Master Enclosure (ID 0), to replace the PVA in the master
enclosure; enter option 2, First Expansion Enclosure (ID 2), to replace the PVA
in the first expansion enclosure; or enter option 3, Second Expansion Enclosure
(ID 3), to replace the PVA in the second expansion enclosure from the FRUTIL
PVA Replacement menu. FRUTIL displays the following:
Do you have a replacement PVA module? Y/N
7. Enter Y(es) and press return. FRUTIL displays the following:
Ensure the replacement PVA’s address is set to zero.
Press return to quiesce device port activity.
8. Set the replacement PVA’s address to zero for the master enclosure, to 2 for the
first expansion enclosure, or to 3 for the second expansion enclosure.
9. Press return and wait for FRUTIL to quiesce the device ports. This may take
several minutes. FRUTIL displays the following:
All device ports quiesced.
Replace the PVA in the master cabinet.
Press return to resume device port activity.
10. Remove the old PVA and install the new PVA.