Technical data

3–9
Compaq HSZ80 Array Controller ACS Version 8.3 Maintenance and Service Guide
CLCP displays the following:
Select an option from the following list:
Code Load & Patch local program Main Menu
0: Exit
1: Enter Code LOAD local program
2: Enter Code PATCH local program
3: Enter EMU Code LOAD utility
Enter option number (0..3) [0] ?
5. Enter option 2, Enter Code PATCH local program. CLCP displays the following:
You have selected the Code Patch local program. This program is used
to manage software code patches. Select an option from the following
list:
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ?
6. Enter option 1, Enter a Patch, to install a patch. CLCP displays the following:
This is the Enter a Code Patch option. The program prompts you for
the patch information, one line at time. Be careful to enter the
information exactly as it appears on the patch release. Patches may
be installed for any version of software; however, patches entered
for software versions other than XXXXX are not applied until the
matching version of software is installed.
To enter any patch, you must first install all patches with lower
patch numbers than the patch you are entering, beginning with patch
number 1, for a specific software version. If you incorrectly enter
the patch information, you are given the option to review the patch
one line at a time.
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Do you wish to continue (y/n) [y] ?