Technical data

Using BACKUP
11.17 Backing Up and Restoring the System Disk
Example 11–1 (Cont.) System Disk Backup to an InfoServer Tape
Copyright © (c) 2000 Compaq Computer Corporation. All rights reserved.
Installing required known files...
Configuring devices...
****************************************************************
The menu can be used to execute DCL commands and procedures for
various "standalone" tasks, such as backing up the system disk.
Please choose one of the following:
1) Execute DCL commands and procedures
2) Shut down this system
Enter CHOICE or "?" to repeat menu: (1/2/?) 1
WARNING --
The normal VMS startup procedure has not executed.
Some commands and utilities will not work as documented.
Enter DCL commands -- Enter "LOGOUT" when done.
When you enter "LOGOUT" a logout message will be displayed,
and you will be returned to the menu.
$$$ MCR ESS$LADCP SHOW SERVICE/TAPE
$$$ MCR ESS$LADCP BIND/WRITE/TAPE TZL04_TAPE
$$$ MOUNT/FOREIGN MADn
$$$ BACKUP/IMAGE DKA100: MADn:SYS_DISK.BCK/SAVE_SET
.
.
.
$$$ LOGOUT
Process SYSTEM_1 logged out at 2-FEB-2000 23:35:17.52
****************************************************************
The menu can be used to execute DCL commands and procedures for
various "standalone" tasks, such as backing up the system disk.
Please choose one of the following:
1) Execute DCL commands and procedures
2) Shut down this system
Enter CHOICE or "?" to repeat menu: (1/2/?)
11.18 Ensuring Data Integrity
BACKUP has several qualifiers for further ensuring the integrity of your backups.
Compaq recommends using these qualifiers if you want to achieve maximum data
integrity. This section describes some of the ways you can increase data
integrity with BACKUP. For more information about these qualifiers, refer to the
OpenVMS System Management Utilities Reference Manual.
Using BACKUP 11–65