Technical data

A.2.1 Logical Printer Object Attributes
hold-jobs-interrupted-by-printer-failure
Specifies whether jobs returned to the spooler after a restart should be
placed in the held or pending state.
Valid values: true or yes for the held state, false or no for the
pending state.
printer-initial-value-document
Identifies an initial-value document object in the server for use on this
logical printer. The printer’s initial-value document is used if the document
does not specify an initial-value document.
printer-initial-value-job
Identifies an initial-value job object in the server for use on this logical
printer.
A.2.2 Physical Printer Object Attributes
bsd-printer-name
Text string that identifies the name of an LPD printer supported by the
Outbound Gateway.
character-sets-ready
Identifies the character set encodings ready to be used on the printer.
document-formats-ready
Identifies the document formats ready to be handled by the printer and
any associated translators.
document-sheets-ready
Specifies the auxiliary document sheets ready for use on this printer.
Valid values: none, doc-set-start-copies-separate.
excluded-filters
Disallows the use of certain translation filters or modification filters for
a particular printer.
Valid values: a list of filters.
extended-lpd-job-identifiers
Specifies that an Outbound Gateway printer should use extended lpd job
numbers when communicating to an external Tru64 UNIX lpd print queue,
when set to yes. This extends the maximum outgoing job number from
999 to 999999, which reduces the chance of job overflow or job loss on the
target server. However, it does so at the expense of compliance with the
LPD protocol as defined by RFC 1179.
A–8 Attribute Descriptions