Specifications

5–34 Maintenance and Service Guide
Removal and Replacement Procedures
3. Peel back the shielding tape that covers the right PC Card
screw
(Figure 5-23).
4. Remove the two silver M2 × 5.0 screws
that secure the
PC Card assembly to the system board.
5. Turn the system board top side up with the PC Card slot
opening facing you.
6. Lift up the back edge of the PC Card assembly to disconnect
it from the system board
.
7. Remove the PC Card assembly.
Figure 5-23. Removing the PC Card Assembly
Reverse the above procedure to install the PC Card assembly.