Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–5
5.5 Hinge Covers
The hinge covers are included in the Miscellaneous Plastics Kit
(spare part number 239039-001).
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer top side up with the front facing you.
3. Open the computer.
4. Use a flat blade screwdriver to pry up on the front edge of the
left
and right hinge covers (Figure 5-3).
Figure 5-3. Removing the Hinge Covers
5. Remove the hinge covers.
Reverse the above procedure to install the hinge covers.