Specifications

Troubleshooting
Maintenance and Service Guide 2–3
3. To close Computer Setup and restart the notebook:
❏ Select File > Save Changes and Exit and press enter.
– or –
❏ Select File > Ignore Changes and Exit and press enter.
4. When you are prompted to confirm your action, press F10.
Selecting from the File Menu
Table 2-1
File Menu
Select To Do This
System Information
■ View identification information about the
notebook, a Port Replicator, and any battery
packs in the system.
■ View specification information about the
processor, memory and cache size, and
system ROM.
Save to Floppy Save system configuration settings to a diskette.
Restore from Floppy Restore system configuration settings from a
diskette.
Restore Defaults Replace configuration settings in Computer
Setup with factory default settings. Identification
information is retained.
Ignore Changes and Exit Cancel changes entered during the current
session, then exit and restart the notebook.
Save Changes and Exit Save changes entered during the current
session, then exit and restart the notebook.