User`s guide

Product Notes for Sun D-5
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: k-appd Product Notes for Sun Last Saved On: 3/1/99 2:18 PM
– The sixth parameter (0x82) is the vendor-unique density code for the
CT-IV, 20 GB.
– The seventh parameter (0x83) is the vendor-unique density code for
CT-IV, 40 GB compressed mode.
– The eighth parameter (0x84) is the vendor-unique density code for
the CT-IV, 35 GB.
– The ninth parameter (0x85) is the vendor-unique density code for the
CT-IV, 70 GB compressed mode.
– The last parameter in the TZ89-data parameter is the default density
3,
CT-IV
in the 70 GB compressed mode.
Where:
CT-IV
= CompacTape IV Data Cartridge
System Shutdown
After you have edited the “st.conf” file, shut down the system as follows:
sync
cd /
shutdown -i0 -g0 -y
Installation of the Tape Drive
Install the tape drive into the storage subsystem and power on the workstation.
We recommend that the TZ89 DLT Cartridge Tape Drive SCSI device address
be set to ID 4 or 5.
NOTE:
If your SCSI host adapter is supported by the
“probe-scsi”
command, then
you can use this command at the boot prompt to verify that the connected device is
correctly attached to the system.