User`s guide

Operation 2-21
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: c-ch2 Operation Last Saved On: 3/1/99 2:14 PM
Press the
Enter
button to validate your choice. If the code is correct, the Main
Menu is displayed. If the code is incorrect, an error screen appears. If you have
forgotten your unlock code, contact your technical support representative for
assistance.
Displaying Firmware Revision
You may display the library robotics firmware revision at any time by pressing
the
Escape
button at the Default Screen to display the Show Status Menu. It
appears as one of the items on the Library Status submenu of the Show Status
Menu. It is also displayed on line 2 of the POST Screen and the Initialization
Screens.
Displaying Error Logs
To display the error history of the module, you need to use the Show History
Menu. Access it as follows:
Fault Code: XXXX
Error Description
DD/MMM/YYYY HH:MM:SS
Entry NNNN Of NNNN
Figure 2-23. Error History Screen
Loading and Unloading Tapes
The Load/Unload menus enable you to specify a source and a destination for a
cartridge movement. As a result, you use exactly the same procedure to load
and unload. To load or unload a tape from the front panel of the module, use
the Load/Unload menus as follows:
READY
Modules 012345_
0
_ _ _ _ _ _ _ _ 9
10
_ _ _ _ _ 16
Figure 2-24. Default Screen