System information
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Preliminary replacement requirements
- Component replacement procedures
- Serial number
- Computer feet
- Battery
- Hard drive
- Optical drive
- WLAN module
- Memory module
- Keyboard
- Top cover
- Speaker assembly
- Power button board
- TouchPad button board
- Modem module
- Bluetooth module
- USB board
- Power connector cable
- Display assembly
- System board
- Optical drive SATA cable and connector
- RTC battery
- Fan/heat sink assembly
- Processor
- Setup Utility
- Specifications
- Backup and recovery
- Connector pin assignments
- Power cord set requirements
- Recycling
- Index
Keyboard
Description Spare part number
Keyboard for use in Brazil 600175-201
Keyboard for use in English and French Canada 600175-121
Keyboard for use in for use in Latin America 600175-161
Keyboard for use in South Korea 600175-AD1
Keyboard for use in Taiwan 600175-AB1
Keyboard for use in Thailand 600175-281
Keyboard for use in the United States 600175-001
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 45).
5. Remove the hard drive (see
Hard drive on page 46)
6. Remove the mini-card compartment cover (see
WLAN module on page 51).
Remove the keyboard:
1. Turn the computer upside down with the front toward you.
2.
Remove the six Phillips PM2.5×6.5 screws that secure the keyboard to the computer.
56 Chapter 4 Removal and replacement procedures