System information
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Preliminary replacement requirements
- Component replacement procedures
- Serial number
- Computer feet
- Battery
- Hard drive
- Optical drive
- WLAN module
- Memory module
- Keyboard
- Top cover
- Speaker assembly
- Power button board
- TouchPad button board
- Modem module
- Bluetooth module
- USB board
- Power connector cable
- Display assembly
- System board
- Optical drive SATA cable and connector
- RTC battery
- Fan/heat sink assembly
- Processor
- Setup Utility
- Specifications
- Backup and recovery
- Connector pin assignments
- Power cord set requirements
- Recycling
- Index
Top cover
Description Spare part number
Top cover (includes Touchpad and bracket, button board, and cable), matte black 600181-001
Top cover, bicotti 600182-001
Top cover, silver 606161-001
Top cover, white 606162-001
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
Battery on page 45).
b. Optical drive (see
Optical drive on page 49).
c. Keyboard (see
Keyboard on page 56).
Remove the switch cover:
1. Turn the computer upside down with the front toward you.
2. Remove the four screw covers (1) at the front edge of the computer.
58 Chapter 4 Removal and replacement procedures