Specifications

3-24 Compaq ProLiant 8500 Server Maintenance and Service Guide
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of Problem Recommended Action
1785-Slot X Drive
Array not Configured
(followed by one of
the following):
(1) Run Compaq
Array Configuration
Utility
(2) No drives
detected
(3) Drive positions
appear to have
changed – Run Drive
Array Advanced
Diagnostics if
previous positions
are unknown. Then
turn system power
OFF and move drives
to their original
positions.
(4) Configuration
information indicates
drive positions
beyond the capability
of this controller.
This may be due to
drive movement from
a controller that
supports more drives
than the current
controller.
(5) Configuration
information indicates
drives were
configured on a
controller with a
newer firmware
version.
(RESUME = F1 KEY)
None Drive array configuration not
detected.
(1) Run the Compaq Array
Configuration Utility.
(2) Turn off system and check
SCSI cable connections to make
sure drives are attached
properly.
(3) Run Array Diagnostic Utility if
previous positions are unknown.
Then turn system power off and
move drives to their original
positions.
(4) To avoid data loss, turn
system power off and reattach
drives to the original controller.
(5) To avoid data loss, reattach
drives to the original controller
or upgrade the controller
firmware to the version on the
original controller using Options
ROMPaq.
Press F1 to resume.
continued