Specifications

Removal and Replacement Procedures 2-37
6. Rotate the cable management arm to the left and out of the way .
3
Figure 2-28. Rotating the cable management arm to the left
7. Push in on the sides of the stop latches and rotate the cam levers downward.
See “Removing the I/O Module from Tower Model Servers” earlier in this chapter.
8. Press the stop latches inward, and remove the I/O module just enough to clear the stops.
See “Removing the I/O Module from Tower Model Servers” earlier in this chapter.
9. Reach into the rack and pull out the I/O module, making sure that the I/O module stop
latches clear the sides of the rack.
Reverse steps 1 through 9 to reinstall the I/O module in the server.