Specifications

BIG-IP Software on the Hewlett-Packard ProLiant BL20p Blade Server System
BIG-IP® Platform Guide for the Hewlett-Packard® ProLiant BL20p Blade Server System 1 - 9
Performing a PXE boot
Once you are connected to the server blade, begin the PXE boot process.
To boot the server blade using the web interface
1. From the summary page of the iLO web interface, click the Bays
tab, and select the bay that houses the target server blade.
2. Click Virtual Power Button, and select Power Cycle System On,
After Off.
3. To open the console window while the server blade is rebooting,
click Remote Console.
4. From the console window, watch for the following prompt, and
press Esc + Shift + 2 before the prompt times out.
Press Esc+Shift+2 to PXE boot
5. Follow the standard prompts until you have completed the
installation.