Specifications

BIG-IP Software on the Hewlett-Packard ProLiant BL20p Blade Server System
BIG-IP® Platform Guide for the Hewlett-Packard® ProLiant BL20p Blade Server System 1 - 13
• At the License File box, click Browse to locate the license file on
the hard drive, and click Install License.
The License Status screen displays the status messages, and the
message Process complete appears when the BIG-IP software has
finished activating the license.
11. To finish the licensing process, click License Terms, review the
EULA, and accept it.
12. At the Reboot Prompt screen, select when you want to reboot the
server blade.
You must reboot the server blade to complete the license activation.
Using the Setup utility
Once you activate the license, the next step in the process is to run the Setup
utility. The Setup utility defines the initial configuration settings required to
install the BIG-IP system into the network.
See the BIG-IP Reference Guide, Part II, The Base Network for full details
and instructions on running the Setup utility. You can download the guide
from the CD.
WARNING
If you are using the BIG-IP software in a redundant system, you must
configure network-based failover, and not hardwired failover. We
recommend that you configure network-based failover during the Setup
utility, as opposed to configuring it in the Configuration utility. For
additional information on configuring failover, see the BIG-IP Reference
Guide, Part IV, Redundant BIG-IP Systems.