QuickSpecs

Operating and
Performance
Specifications for
Interconnect GbE Switch
Dimensions Height 10.405 in (26.43 cm)
Width 1.535 in (3.899 cm)
Depth 27.697 in (70.35 cm)
Weight 11.5 lb/5.2 kg per interconnect switch
Performance 9.6 Gbps external port bandwidth per server blade enclosure (full duplex)
Forwarding rate 0.15 million pps per 10/100 port, 1.5 million pps per gigabit port, (64-
byte packets)
Non-blocking, full-wire speed for all connections
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support
Forwarding Mode Store and forward
MAC Addresses 8,191 per interconnect switch; MAC address based filtering and MAC address packet
priority configuring
Forwarding table age time Maximum age: 1 to 1,000,000 seconds; default: 300 seconds
Memory 32MB Main, 6MB flash and 16MB packet buffer per interconnect switch
Compliance IIEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE only), 802.1D, 802.1p, 802.3ac,
802.3ad (Static), and 802.1Q
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB (RFC 2863), Ethernet
MIB (RFC 1643), 802.1Q Extended Bridge MIB (RFC 2674), Entity MIB (RFC 2037),
SNMP Trap Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps
(RFC 1757), and HP Enterprise Switch MIBs and Environmental Traps
IGMP v1 (RFC 1112), IGMP v2 (RFC 2236), SNTP (RFC 1361), Telnet (RFC 854), TFTP
client (RFC 783), BOOTP client, (RFC 2132), DHCP client, (RFC 2131) and ZModem
Network Transfer Rate 10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (half-duplex) 1000 Mbps
1000 Base-TX (full-duplex) 2000 Mbps
1000 Base-SX (full-duplex) 2000 Mbps
Connector 12 RJ-45, 2 DB-9 (C-GbE Interconnect Kit)
4 LC fiber, 8 RJ-45, 2 DB-9 (F-GbE Interconnect Kit)
EMI FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety UL/CUL Listed Accessory
CE
Power Requirements -48V DC: 1050 mA, 50 W maximum (per interconnect switch)
Temperature Range Operating 50° to 95° F (10° to 35° C)
Non-operating -22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating 20% to 80%
Non-operating 5% to 95%
Wet Bulb Temperature Operating 82.4° F (28° C)
Non-operating 101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F per 1,000 ft (1° C per 304.8 m). No direct sunlight.
Upper operating limit is 10,000 ft or 70Kpa (3,048 m or 10.1 psia). Upper non-operating limit is 30,000 ft or 30.3 KPa
(9,144 m or 4.4 psia). Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C).
Altitude maximum for storage is 70 KPa.
QuickSpecs
HP ProLiant BL20p p-Class Server Blade
Technical Specifications
DA - 11411 Worldwide — Version 24 — September 24, 2004 Page 28