QuickSpecs

Configuration Steps

For a complete configuration of the ProLiant BL20p, do the following:

Select BL p-Class server blades:

Single Intel Pentium III 1.40 GHz processor, 512-MB ECC SDRAM

(2 X 256MB) (230040-B21)

Two Intel Pentium III 1.40 GHz processors, 1-GB ECC SDRAM (2 X 512MB) (257959-B21) (Not offered in NA)

(NOTE: Additional options include processors, memory, and gigabit NICs.)

PLUS

Decide how many BL p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 8 ProLiant BL20p server blades):

BL p-Class server blade enclosure with 8 Rapid Deployment Pack licenses

(281404-B21)

BL p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)

PLUS

Select an interconnect. Interconnects are sold in pairs. One pair of interconnects is required with each BL p-Class server blade enclosure:

BL p-Class RJ-45 Patch Panel (with 32 RJ-45 connectors) (230766-B21)

BL p-Class RJ-45 Patch Panel 2 (with Fibre Channel pass through and 32 RJ-45 connectors) (306465-B21)

NOTE:

Fibre Channel connectivity is not available on the BL20p.

BL p-Class C-GbE2 Interconnect Kit (with 12 RJ-45 10/100/1000 T/TX/T external ports) (283192-B21)

BL p-Class F-GbE2 Interconnect (with 8 LC 1000 SX and 4 RJ-45 10/100/1000 T/TX/T external ports) (283193-B21)

BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T and 8 RJ-45 10/100 T/TX external ports (249655-B21)

BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX and 8 RJ-45 10/100 T/TX external ports) (279720-B21)

PLUS

4. Select BL p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power

configuration:

http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls

NOTE:

Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).

Single phase power enclosure with four hot-plug power supplies (NA/JPN- 239162-001) (Single-phase power enclosure holds a max of four

power supplies; no need to order additional power supplies with this option kit) (INTL - 239162-421)

Three-phase power enclosure with six hot-plug power supplies (NA/JPN- 230769-001) (INTL - 230769-421) (Three-phase power enclosure

holds a max of six power supplies no need to order additional power supplies with this option kit)

(Power enclosures and power supplies can also be purchased separately see options list for part numbers)

PLUS

5. Select power distribution: Scalable bus bar - Supports up to 5 server blade enclosures (240560-B21)

Mini bus bar - Supports up to 3 server blade enclosures (240559-B21)

Power Bus Box - connects 1 power enclosure to 1 server blade enclosure (240562-B21

QuickSpecs

HP ProLiant BL20p p-Class Server Blade

Overview

DA - 11411 Worldwide — Version 24 — September 24, 2004

Page 6