QuickSpecs HP ProLiant DL2000 Multi Node Server Overview The DL2000 is optimized for efficiency, density and flexibility and a server node can be serviced individually without impacting the operation of other server nodes sharing the same chassis. The DL2000 consists of up to 4 independent DL170e G6 servers in the 2U HP ProLiant e2000 G6 Chassis. The servers share power supplies and fans, providing greater power and cooling efficiencies.
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Six-Core Processors One of the following Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor depending on Model Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor Intel® Xeon® X5660 (2.
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features Upgradeability Upgradeable to two processors (12 cores) Memory Protection Advanced ECC (multi-bit error protection) Mirroring mode Lockstep mode Memory Type DDR3 Registered (RDIMM) and Unbuffered (UDIMM) Maximum (RDIMM) (per 192GB (12 x 16GB) PC3-8500R (DDR3-800) server node) Maximum (UDIMM) (per 48GB (12 x 4GB) PC3-10600E (DDR3-1333) server node) NOTE: Depending on the memory configuration and processor model, the memory speed may run
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features 3 Full-height PCIe Riser Option Expansion Slots # 1 3 Half-height PCIe Riser (Standard with half-height 1U nodes) Expansion Slots # 1 PCI-Express 2.0 Technology PCI-Express 2.0 PCI-Express 2.0 Technology PCI-Express 2.0 x8 x8 7 Low Profile 3.
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features Internal Storage Devices Diskette Drives Optical Drives Hard Drives Drive Bays One of the following depending on Model Via USB only DVD drive via USB only (External support only) None ship standard Up to 8 or 12 Hot plug SAS/SATA 3.5" drives Up to 16 or 24 Hot plug SAS/SATA 2.5" drives NOTE: The 12 LFF HDD cage is available for special large volume configurations only. Please contact your HP representative for details.
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features Graphics Integrated Matrox Graphics G200e, 32MB Standard 16 bit color: maximum resolution of 1600 x 1200 32 bit color: maximum resolution of 1280 x 1024 The following NVIDIA graphics cards are tested for compatibility in the DL2000 (when using full-height 2U nodes): NVIDIA Quadro 6000 512MB PCIe x 16 graphics card NVIDIA Quadro FX5800 512MB PCIe x 16 graphics card NVIDIA Quadro 4000 512MB PCIe x 16 graphics card NVIDIA Quadro FX3800 512MB
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features provided by the utility. Power Supply HP has a new design for ProLiant power supplies - the new Common Slot power supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with high-efficiency Common Slot power supplies.
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features Form Factor HP ProLiant e2000 G6 Chassis - 2U Chassis can support up to four DL170e server nodes in the 2U chassis. HP ProLiant DL170e G6 Server - Half-width system board. Half-height (1U) or full-height (2U) depending on riser option selected. HP offers four different drive cages for the 2U HP ProLiant e2000 G6 Chassis 8 LFF HDD Cage 12 LFF HDD Cage NOTE: Available for special large volume configurations only.
QuickSpecs HP ProLiant DL2000 Multi Node Server Standard Features Embedded Manageability HP ProLiant Lights-Out 100 HP Lights-Out 100 with Optional LO100 Advanced Licenses for Virtual KVM and Virtual Media. Standard Features: IPMI 2.0, DCMI 1.0, and SMASH CLP support Configuration via ROM Setup Utility or LO100cfg utility USB 2.
QuickSpecs HP ProLiant DL2000 Multi Node Server Optional Features HP Insight Control management software HP Insight Control for Linux HP Insight Control for Linux (IC-Linux), as a product option, delivers essential lifecycle management that can help save time and money by integrating discovery, server deployment, firmware updates & provisioning, health & performance management, remote management, and virtualization.
QuickSpecs HP ProLiant DL2000 Multi Node Server Optional Features Core Server Management ProLiant 100 Series G6 Core Management Software for ProLiant 100 Series Servers HP provides management solutions that are designed to simplify a server's installation, configuration, and maintenance throughout the entire server lifecycle. This provides the customers with higher levels of operational efficiency and highly reliable systems.
QuickSpecs HP ProLiant DL2000 Multi Node Server Optional Features Boot environment and GUI Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server.
QuickSpecs HP ProLiant DL2000 Multi Node Server Optional Features High Performance Clusters HP Cluster Platforms HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and Novell SLES, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator simplifies ordering.
QuickSpecs HP ProLiant DL2000 Multi Node Server Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant DL2000 Multi Node Server Service and Support Standard Care Standard Care Package: Package that maintains high level of server availability HP ProLiant Server Hardware Installation Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant DL2000 Multi Node Server Service and Support and Software Support); +10 Proactive Select Credits, Factory Express Insight Remote Support The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers.
QuickSpecs HP ProLiant DL2000 Multi Node Server Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
QuickSpecs HP ProLiant DL2000 Multi Node Server Configuration Information - Factory Integrated Models HP Power Supplies HP Mini-SAS to SAS/SATA E' FIO NOTE: Quantity 2 per chassis. HP Mini-SAS to SAS/SATA F' FIO NOTE: Quantity 2 per chassis. 4 Node 16SFF Configurations - order the following cables to connect the midplane to the drive backplane: HP Mini-SAS to Mini-SAS 25cm B FIO NOTE: Quantity 1 per chassis. HP Mini-SAS to Mini-SAS 33cm C FIO NOTE: Quantity 3 per chassis.
QuickSpecs HP ProLiant DL2000 Multi Node Server Configuration Information - Factory Integrated Models HP Memory HP DL170e G6 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) FIO Processor Kit HP DL170e G6 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) FIO Processor Kit HP DL170e G6 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO Processor Kit Four-Core Processors HP DL170e G6 Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W) FIO Processor Kit HP DL170e G6 Intel® Xeon® E5630 (2.
QuickSpecs HP ProLiant DL2000 Multi Node Server Configuration Information - Factory Integrated Models HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low Power Memory Kit NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
QuickSpecs HP ProLiant DL2000 Multi Node Server Configuration Information - Factory Integrated Models Configuration 4x1U nodes with 8LFF HDD cage (2 HDDs/node max) 4x1U nodes with 16SFF HDD cage (4 HDDs/node max) 4x1U nodes with 24SFF HDD cage (6 HDDs/node max) 2x2U nodes with 8LFF HDD cage (4 HDDs/node max) 2x2U nodes with 16SFF HDD cage (8 HDDs/node max) Supported Controllers Embedded (SATA only) or P410 (SATA/SAS) Embedded (SATA only) or P212 or P410 (SATA/SAS) Embedded (SATA only) or P410 (SATA/SAS)
QuickSpecs HP ProLiant DL2000 Multi Node Server Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. HP DL170h Dedicated Management Port OPT Kit 601818-B21 HP Unique Options NOTE: Each ProLiant DL170e G6 Server comes standard with sideband support for LO100i through the shared, system NIC.
QuickSpecs HP ProLiant DL2000 Multi Node Server Core Options HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series proc
QuickSpecs HP ProLiant DL2000 Multi Node Server Core Options the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive HP 600GB 6G SAS 10K rpm SFF (2.
QuickSpecs HP ProLiant DL2000 Multi Node Server Core Options NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html SATA Hot Plug Midline (MDL) Solid State Drives HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive SATA Hot Plug 3.5" Midline (MDL) Solid State Drives HP 60GB 3G SATA LFF (3.
QuickSpecs HP ProLiant DL2000 Multi Node Server Core Options HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.
QuickSpecs HP ProLiant DL2000 Multi Node Server Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant DL2000 Multi Node Server Additional Options HP Smart Array P410 Controller HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller HP Smart Array P411 Controller HP Smart Array P411/256 2-ports Ext PCIe x8 SAS Controller HP Smart Array P411/512 FBWC 2-ports Ext PCIe x8 SAS Controller HP Smart Array P411/1G FBWC 2-ports Ext PCIe x8 SAS Controller Smart Arr
QuickSpecs HP ProLiant DL2000 Multi Node Server Additional Options NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.html (SCSI HBA) HP StorageWorks Options StorageWorks Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.
QuickSpecs HP ProLiant DL2000 Multi Node Server Additional Options HP Rack Options HP DL2000 Shipping Bracket Kit NOTE: This kit is required after initial purchase when shipping a DL2000 in a rack with 1U or more of space above it from one location to another. HP Rail Kits HP 10U Bulk Rail 2U Kit HP DL2000 Hardware Rail Kit NOTE: The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers.
QuickSpecs HP ProLiant DL2000 Multi Node Server Memory HP ProLiant DL170e G6 Server NOTE: Memory configurations show Maximum Memory population.
QuickSpecs HP ProLiant DL2000 Multi Node Server Memory DIMM Type -> Unbuffered with ECC DIMMs (UDIMMs) Single Rank Quad Rank (4R) (1R) Dual Rank (2R) 16GB 4GB 16GB 1GB 2GB 4GB 1333 1066 1066 1333 1333 1333 LV/Std Std Std Std Std LV/Std Registered DIMMs (RDIMMs) Single Rank DIMM Rank -> (1R) DIMM Capacity -> 4GB DIMM Native Speed (MHz) -> 1333 Voltage LV/Std 2GB 1333 Std Dual Rank (2R) 4GB 8GB 8GB 1333 1066 1333 Std Std LV/Std SLOTS THAT CAN BE POPULATED 16 slot servers 16 16 16 16 16 16 12 12
QuickSpecs HP ProLiant DL2000 Multi Node Server Memory Chnl 1 slot # 1 2 3 CPU1 population order A D G slot # 1 2 3 CPU2 population order A D G Chnl 1 Chnl 2 4 5 6 B E H 4 5 6 B E H Chnl 2 Chnl 3 7 8 C F 7 8 C F Chnl 3 RDIMM maximum configuration (2 CPUs) 192GB, consisting of sixteen (16) 16GB quad rank PC3-8500 RDIMMs Chnl 1 slot # 1 2 3 CPU1 population order A; 16GB DIMM D; 16GB DIMM G; empty slot # 1 2 3 CPU2 population order A; 16GB DIMM D; 16GB DIMM G; empty Chnl 1 Chnl 2 4
QuickSpecs HP ProLiant DL2000 Multi Node Server Memory NOTE: Capacity references are rounded to the common Gigabyte values.
QuickSpecs HP ProLiant DL2000 Multi Node Server Memory HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low Power Memory Kit NOTE: All DDR3 memory option kits consist of one DIMM per kit.
QuickSpecs HP ProLiant DL2000 Multi Node Server Storage 1-8 Eight 3.5" Hot-plug SAS/SATA hard drive bays (two node configuration) 1-8 Eight 3.5" Hot-plug SAS/SATA hard drive bays (four node configuration) 1-24 Twenty-four 2.5" Hot-plug SAS/SATA hard drive bays 1-16 Sixteen 2.
QuickSpecs HP ProLiant DL2000 Multi Node Server Storage Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug SFF (2.
QuickSpecs HP ProLiant DL2000 Multi Node Server Storage 1TB 3G SATA 7.2K 500GB 3G SATA 7.2K 160GB 3G SATA 7.2K 24 1-24 SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Position Supported Supported 2TB 3G SATA 7.2K Up to 8 1-8 1TB 3G SATA 7.2K 500GB 3G SATA 7.2K SATA Hot Plug Midline (MDL) Solid State Drives Quantity Position Supported Supported 120GB 3.0G SATA SSD 24 1-24 60GB 3.0G SATA SSD SATA Hot Plug 3.5" Midline (MDL) Solid State Drives Quantity Position Supported Supported 120GB 3.
QuickSpecs HP ProLiant DL2000 Multi Node Server Power Specifications HP 750W Common Slot Platinum Hot Plug Power Supply Kit Part Number 593831-B21 Input Voltage Range ( V rms ) 100 to 240 Frequency Range (Nominal) ( Hz ) 50/60 Nominal Input Voltage ( Vrms ) 120 100 Maximum Rated Output Wattage Rating 750 750 Nominal Input Current ( A rms ) 8.6 7.1 Maximum Rated Input Wattage Rating ( Watts ) 841 828 Maximum Rated VA ( Volt-Amp ) 863 850 Efficiency ( % ) 89.2 90.6 Power Factor Leakage Current ( mA ) 0.
QuickSpecs HP ProLiant DL2000 Multi Node Server Power Specifications HP 1200W Common Slot Silver Hot Plug Power Supply Kit Part Number 500172-B21 Input Voltage Range ( V rms ) 100 to 240 Frequency Range (Nominal) ( Hz ) 50/60 Nominal Input Voltage ( Vrms ) 120 100 Maximum Rated Output Wattage Rating 800 900 Nominal Input Current ( A rms ) 9.7 9.
QuickSpecs HP ProLiant DL2000 Multi Node Server System Specifications Power ProLiant DL170e G6 Fully Configured Fully Loaded System Input Wattage (W) Fully Loaded System Input Current (A rms) Fully Loaded System Thermal (BTU- Hr) Fully Loaded System VA (Volt-Amp) System Leakage with all power supplies loaded (mA) System Inrush Current with all power supplies loaded (A) 115V/60Hz 651 5.7 2218 657 1.58 220V/50Hz 638 3.0 2174 657 3.
QuickSpecs HP ProLiant DL2000 Multi Node Server Technical Specifications System Unit Dimensions (H x W x D) (with bezel) Weight (approximate) Input Requirements (per power supply) 3.44 x 17.64 x 28.91 in (8.74 x 44.81 x 73.43 cm) Maximum (all hard drives, power supplies, and processors installed) Minimum (one hard drive, power supply, and processor installed) Rated Line Voltage 77.00 lb (34.93 kg) 49.00 lb (22.22 kg) 90 to 140 VAC 180 to 264 VAC Rated Input Current 7.31A at 115VAC 3.
QuickSpecs HP ProLiant DL2000 Multi Node Server Technical Specifications Emissions Classification (EMC) HP Smart Array B110i SATA RAID Controller Simultaneous drive transfer channels Transfer rate synchronous (maximum theoretical) Data transfer method Drive support Data transfer modes Protocol Feature RAID levels supported RAID Features RAID OS Support DA - 13847 average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
QuickSpecs HP ProLiant DL2000 Multi Node Server Technical Specifications SUSE Linux Enterprise Server 10 (AMD64/EM64T) SUSE Linux Enterprise Server 11 (x86) SUSE Linux Enterprise Server 11 (AMD64/EM64T) Embedded NC362i PCIe Network Interface Gigabit Server Adapter Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
