QuickSpecs HP ProLiant DL1000 Multi Node Server Overview The HP ProLiant DL1000 Multi Node Server is the first multi node DL server designed for higher density and increased power efficiency yet is flexible enough to be optimally configured for varying application requirements. The DL1000 supports up to four independent HP ProLiant DL170h G6 Servers in the 2U HP ProLiant h1000 G6 Chassis. The servers share power supplies and fans, providing greater power and cooling efficiencies.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Six-Core Processors One of the following Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo depending on Model 2/2/2/2/3/3) Quad-Core Processors Intel® Xeon® Processor E5640 (2.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Upgradeability Upgradeable to two processors (12 cores) NOTE: DL170h G6 servers purchased with Intel Xeon 5500 Series processors are not upgradeable to Intel Xeon 5600 series processors.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Option Slots # 1 2 3 Full-height PCIe Riser Option (Standard in 2 Node BTO Models) Expansion Slots # 1 3 Half-height PCIe Riser (Standard in 4 Node BTO Models and with halfheight nodes) Storage Controller Expansion Slots # 1 PCI-Express 2.0 PCI-Express 2.0 PCI-Express 2.0 Technology PCI-Express 2.0 PCI-Express 2.0 Technology x8 Width* Width x8 4 x8 x8 5 x8 x8 Bus Width** Width 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features NOTE: When adding a Smart Array Controller to a 16SFF SAS HDD configuration, an HP h1000 SFF SAS CONTROLLER CABLE OPTION KIT (P/N 519507-B21) must be ordered to connect the Smart Array Controller to the hard drive backplane. When a controller is added during a CTO buildup, the appropriate cables are included and this kit is not required.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Graphics Integrated Matrox Graphics G200e, 32MB Standard 16 bit color: maximum resolution of 1600 x 1200 32 bit color: maximum resolution of 1280 x 1024 The following NVIDIA graphics cards are supported in the DL1000: NVIDIA Quadro FX5800 512MB PCIe x 16 graphics card NOTE: For more information on the latest visualization and acceleration qualification status, please see http://www.hp.com/go/accelerators.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Common Slot Power Supplies HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with Common Slot, High Efficiency and Right-Size Power Supplies.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Form Factor HP ProLiant h1000 G6 Chassis - 2U Chassis can support up to four DL170h server nodes in the 2U chassis. HP ProLiant DL170h G6 Server - Half-width system board. Half-height (1U) or full-height (2U) depending on riser option selected. HP offers two different drive cages for the 2U HP ProLiant h1000 G6 Chassis: 8 LFF HDD Cage or 16 SFF HDD Cage.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Security Power-on password Setup password Diskette boot control Secure Sockets Layer (SSL) Secure Shell (SSH) Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
QuickSpecs HP ProLiant DL1000 Multi Node Server Optional Features HP Insight Control management software HP Insight Control for Linux HP Insight Control for Linux (IC-Linux), as a product option, delivers essential lifecycle management that can help save time and money by integrating discovery, server deployment, firmware updates & provisioning, health & performance management, remote management, and virtualization.
QuickSpecs HP ProLiant DL1000 Multi Node Server Optional Features Core Server Management ProLiant 100 Series G6 Core Management Software for ProLiant 100 Series Servers HP provides management solutions that are designed to simplify a server's installation, configuration, and maintenance throughout the entire server lifecycle. This provides the customers with higher levels of operational efficiency and highly reliable systems.
QuickSpecs HP ProLiant DL1000 Multi Node Server Optional Features servers. The user experience is consistent with SmartStart and offers the following capabilities: Boot environment and GUI Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server.
QuickSpecs HP ProLiant DL1000 Multi Node Server Optional Features High Performance Clusters HP Cluster Platforms HP HPC Interconnects HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and Novell SLES, as well as Microsoft Windows HPC Server.
QuickSpecs HP ProLiant DL1000 Multi Node Server Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant DL1000 Multi Node Server Service and Support Standard Care Standard Care Package: Package that maintains high level of server availability HP ProLiant Server Hardware Installation Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant DL1000 Multi Node Server Service and Support and Software Support); +10 Proactive Select Credits, Factory Express Insight Remote Support The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers.
QuickSpecs HP ProLiant DL1000 Multi Node Server Pre-configured Models NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs. NOTE: HP does not allow factory integration of options into pre-configured models.
QuickSpecs HP ProLiant DL1000 Multi Node Server Pre-configured Models Eight Drive Non-Hot-Plug Serial ATA (SATA) 4 Node Models NOTE: Only hot-plug form-factor HDDs are supported but are used in a cold-swap manner in the base configuration. Upgrading to 8 Hot Plug SATA requires the addition of the B110i Hot-Plug Advance Pack or storage controller. Upgrading to SAS hard drives requires the addition of a storage controller.
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models Power Supplies - Enablement Kits HP h1000 Common Slot PS BP FIO Kit NOTE: This backplane must be ordered with any Common Slot High Efficiency Power Supply. HP h1000 Power Supply Fan Controller Factory Integrated Kit NOTE: This fan controller kit must be ordered with the 750W Industry Standard Power Supply (P/N: 515997-B21).
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models HP I/O Expansion Options Full-height (or 2U nodes) HP DL170h I/O Riser PCIe x16 x4 x4 FIO HP DL170h I/O Riser PCIe x8 x8 x8 FIO HP DL170h I/O Riser PCIe x16 x8 FIO NOTE: The 2 slot riser (P/N: 512481-B21) is the only riser option that supports the NVIDIA FX5800 graphics card. Half-height (or 1U nodes) HP DL170h I/O Riser PCIe x16 FIO NOTE: This is the only riser option for 4 Node configurations.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. HP DL170h Dedicated Management Port OPT Kit 575498-B21 HP Unique Options NOTE: Each ProLiant DL170h G6 Server comes standard with sideband support for LO100i through the shared, system NIC.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options HP Memory HP Hard Drives Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options NOTE: If using SAS hard drives, a Smart Array controller is required. For BTO configurations only, and For 3.5" drive cable kit P/N 519503-B21 or for 2.5" cable kit P/N 519507-B21. SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 6G SAS 10K rpm SFF (2.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) SATA Hot Plug Midline (MDL) Solid State Drives HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive SATA Hot Plug 3.5" Midline (MDL) Solid State Drives HP 60GB 3G SATA LFF (3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options High Performance Clusters HP Cluster Management Utility HP Cluster Management Utility Compute Node Flexible License NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options HP Smart Array P410 Controller HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller HP Smart Array P410/512 BBWC 2-ports Int PCIe x8 SAS Controller HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller HP Smart Array P411 Controller HP Smart Array P411/256 2-ports Ext PCIe x8 SAS Controller HP Smart Array P411/512 BBWC 2-ports Ext PCIe x8 SAS Controller HP Smart
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options HP Tape Backup HP Disk Backup HP StorageWorks Options NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For hardware and software compatibility of HP StorageWorks tape backup products see: http://www.hp.com/go/connect.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options HP StorageWorks U320e SCSI Dual Channel Host Bus Adapter NOTE: Recommended HBA for MSL SCSI Tape Library connect. StorageWorks Converged Network Adapter HP StorageWorks CN1000E Dual Port Converged Network Adapter HP CN1000Q Dual Port Converged Network Adapter HP Disk Storage Systems MSA SAN Storage Arrays HP StorageWorks 60 Modular Smart Array NOTE: Rack-mountable 12-drive (3.5" 3G SAS/1.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options HP R/T3000 3300VA High Voltage NA/JPN 2U Rackmount Uninterruptible Power System HP R/T3000 3300VA INTL 2U Rackmount Uninterruptible Power System NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13417_div/13417_div.html (Worldwide) NOTE: Additional HP Uninterruptible Power Systems (UPS) are available for this equipment. For information on all HP UPSs and accessories please go to: www.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options HP Rack Series HP Rack Options HP Rack 10000 G2 Series (Carbon/Graphite Metallic) HP 10642 G2 Pallet Universal Rack HP 10642 G2 Shock Universal Rack NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed. NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options 4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory HP ProLiant DL170h G6 Server NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory DIMM Type -> Registered DIMMs (RDIMMs) Unbuffered with ECC DIMMs (UDIMMs) Single Rank (1R) Dual Rank (2R) 1GB 2GB 4GB Single Rank (1R) 4GB 2GB Dual Rank (2R) 4GB 8GB 8GB Quad Rank (4R) 4GB 16GB 1333 1333 1333 1066 1333 1066 1066 1333 1333 1333 LV/Reg Reg Reg Reg LV/Reg Reg Reg Reg Reg Reg SLOTS THAT CAN BE POPULATED 16 slot servers 16 16 16 16 16 12 12 12 12 12 MAXIMUM MEMORY CAPACITY (GB) 16 slot servers 64 32 64
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory 16 DIMM SLOTS (8 per CPU node) Chnl 1 slot # 1 2 3 CPU1 population order A D G slot # 1 2 3 CPU2 population order A D G Chnl 1 Chnl 2 4 5 6 B E H 4 5 6 B E H Chnl 2 Chnl 3 7 8 C F 7 8 C F Chnl 3 Standard memory configuration (1 CPU model) 6GB, consisting of three (3) 2GB dual-rank PC3-10600E UDIMMs Chnl 1 slot # 1 2 3 CPU1 population order A; 2GB DIMM D; empty G; empty slot # 1 2 3 CPU2 population order A; empty D; empty G; emp
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory Chnl 1 slot # 1 2 3 CPU1 population order A; 2GB DIMM D; 2GB DIMM G; empty slot # 1 2 3 CPU2 population order A; empty D; empty G; empty Chnl 1 Chnl 2 4 5 6 B; 2GB DIMM E; 2GB DIMM H; empty 4 5 6 B; empty E; empty H; empty Chnl 2 Chnl 3 7 8 C; 2GB DIMM F; 2GB DIMM 7 8 C; empty F; empty Chnl 3 Standard memory replaced with optional memory (1 CPU model) RDIMM maximum configuration 96GB, consisting of six (6) 16GB quad-rank PC3-8500 RD
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory Chnl 1 slot # 1 2 3 CPU1 population order A; 16GB DIMM D; 16GB DIMM G; empty slot # 1 2 3 CPU2 population order A; 16GB DIMM D; 16GB DIMM G; empty Chnl 1 Chnl 2 4 5 6 B; 16GB DIMM E; 16GB DIMM H; empty 4 5 6 B; 16GB DIMM E; 16GB DIMM H; empty Chnl 2 Chnl 3 7 8 C; 16GB DIMM F; 16GB DIMM 7 8 C; 16GB DIMM F; 16GB DIMM Chnl 3 UDIMM maximum configuration 48GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs Chnl 1 slot # 1 2 3
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory Following are memory options available from HP: Registered DIMMs (RDIMMs) HP Memory HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low Power Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LV include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient NOTE: PC3L is a low voltage memory.
QuickSpecs HP ProLiant DL1000 Multi Node Server Storage 1-8 Eight 3.5" Hot-plug SAS/SATA hard drive bays 1-16 Sixteen 2.5" Hot-plug SAS/SATA hard drive bays Drive Support Removable Media DVD-ROM DVD/CD RW Quantity Supported Up to 2 per node Up to 2 per node Position Supported External External Controller USB USB Hard Drives NOTE: The components of a storage subsystem (e.g.
QuickSpecs HP ProLiant DL1000 Multi Node Server Storage SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives Quantity Position Supported Supported 500GB 6G SAS 7.2K Up to 16 1-16 SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives Quantity Position Supported Supported 2TB 6G SAS 7.2K Up to 8 1-8 1TB 6G SAS 7.2K 750GB 3G SAS 7.2K SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives Quantity Position Supported Supported 500GB 3G SATA 7.2K 16 1-16 160GB 3G SATA 7.2K SATA Hot Plug LFF (3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Storage 250GB 3G SATA 7.2K 160GB 3G SATA 7.2K Up to 8 1-8 SATA Hot Plug Midline (MDL) Solid State Drives Quantity Position Supported Supported 120GB 3.0G SATA SSD 16 1-16 60GB 3.0G SATA SSD SATA Hot Plug 3.5" Midline (MDL) Solid State Drives Quantity Position Supported Supported 120GB 3.0G SATA SSD Up to 8 1-8 60GB 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Power Specifications HP 460W Common Slot Gold Hot Plug Power Supply Kit Part Number 503296-B21 Input Voltage Range ( V rms ) 100 to 240 Frequency Range (Nominal) ( Hz ) 50/60 Nominal Input Voltage ( Vrms ) 120 100 Maximum Rated Output Wattage Rating 460 460 Nominal Input Current ( A rms ) 5.5 4.5 Maximum Rated Input Wattage Rating ( Watts ) 526 520 Maximum Rated VA ( Volt-Amp ) 548 542 Efficiency ( % ) 87.5 88.5 Power Factor Leakage Current ( mA ) 0.42 0.
QuickSpecs HP ProLiant DL1000 Multi Node Server Power Specifications HP 750W Common Slot Platinum Hot Plug Power Supply Kit Part Number 593831-B21 Input Voltage Range ( V rms ) 100 to 240 Frequency Range (Nominal) ( Hz ) 50/60 Nominal Input Voltage ( Vrms ) 120 100 Maximum Rated Output Wattage Rating 750 750 Nominal Input Current ( A rms ) 8.6 7.1 Maximum Rated Input Wattage Rating ( Watts ) 841 828 Maximum Rated VA ( Volt-Amp ) 863 850 Efficiency ( % ) 89.2 90.
QuickSpecs HP ProLiant DL1000 Multi Node Server Power Specifications HP 1200W Common Slot Silver Hot Plug Power Supply Kit Part Number 500172-B21 Input Voltage Range ( V rms ) 100 to 240 Frequency Range (Nominal) ( Hz ) 50/60 Nominal Input Voltage ( Vrms ) 120 100 Maximum Rated Output Wattage Rating 800 900 Nominal Input Current ( A rms ) 9.7 9.
QuickSpecs HP ProLiant DL1000 Multi Node Server System Specifications Power 115V/60Hz 220V/50Hz ProLiant DL170h G6 Fully Configured 651 638 Fully Loaded System Input Wattage (W) 5.7 3.0 Fully Loaded System Input Current (A rms) 2218 2174 Fully Loaded System Thermal (BTU- Hr) 657 657 Fully Loaded System VA (Volt-Amp) 1.58 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Technical Specifications System Unit Dimensions (H x W x D) (with bezel) Weight (approximate) Input Requirements (per power supply) 3.44 x 17.64 x 28.91 in (8.74 x 44.81 x 73.43 cm) Maximum (all hard drives, power supplies, and processors installed) Minimum (one hard drive, power supply, and processor installed) Rated Line Voltage 72.00 lb (32.7 kg) 40.00 lb (18.2 kg) 90 to 140 VAC 180 to 264 VAC Rated Input Current 7.31A at 115VAC 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Technical Specifications average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle LWAd 7.3 LpAm 55dBA Operating LWAd 7.
QuickSpecs HP ProLiant DL1000 Multi Node Server Technical Specifications Embedded NC362i PCIe Network Interface Gigabit Server Adapter Data Transfer Method Controller Network Transfer Rate Connector Cable Support Environment-friendly Products and Approach End-of-life Management and Recycling Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
