QuickSpecs HP ProLiant DL1000 Multi Node Server Overview 3 Node 16SFF HDD Model Illustrated Front View: 1. 16 DDR3 DIMM slots 2. Optional Right Power Buttons, Health LEDs and UID bezel 3. 16 2.5" SFF SAS/SATA hard drive bays (alternate configuration available with 8 3.5" LFF SAS/SATA hard drive bays) 4. Optional Left Power Buttons, Health LEDs bezel 5. 4 x 80mm system fans 6. Quad-Core Intel® Xeon® 5500 series processors (supports up to two per node) 7. Low Profile PCIe x16 Gen2 Slot 8.
QuickSpecs HP ProLiant DL1000 Multi Node Server Overview Up to 128 GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated in 16 slots Up to 24 GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slots Network Controller: HP NC362i Integrated Dual Port Gigabit Server Adapter Storage Controllers: Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller (RAID 0, 1, 10) NOTE: Transfer rate: up to 3
QuickSpecs HP ProLiant DL1000 Multi Node Server Overview Deployment/Serviceability: ProLiant 100 series Server Set-up and Deployment software tools: The HP ProLiant Easy Set-up CDs and ISO image downloads offer Assisted and Manual single server installation, setup, and deployment capability.
QuickSpecs HP ProLiant DL1000 Multi Node Server Overview This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Quad-Core Processors One of the following Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) depending on Model Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3) Intel® Xeon® Processor X5550 (2.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Memory Type DDR3 Registered (RDIMM) and Unbuffered (UDIMM) Standard (per server node) 6 GB (3 x 2 GB) PC3-10600E (DDR3-1333) Unbuffered DIMMs Maximum (RDIMM) (per 128 GB (16 x 8 GB) PC3-10600R-9R (DDR3-1333) for server node) Registered Memory configurations Maximum (UDIMM) (per 24 GB (12 x 2 GB) PC3-10600E (DDR3-1333) for server node) Unbuffered Memory configurations NOTE: Depending on the memory configuration and processor model, the memo
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features 3 Full-height PCIe Riser Option (Standard in 2 Node preconfigured Models) Expansion Slots # 1 3 Half-height PCIe Riser (Standard in 4 Node preconfigured Models and with half-height nodes) Expansion Slots # 1 PCI-Express 2.0 Technology PCI-Express 2.0 PCI-Express 2.0 Technology x8 x8 7 Low Profile 3.3 volts Bus Width** Width Bus Number Form Factor Notes x16 Connector Width* Width x16 4 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Interfaces Network RJ-45(Ethernet) Management Health LED Power 2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant Lights Out 100i Remote Management) 1 1 3 (two rear, one internal) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features IPMI 2.0 & SMASH CLP support ROM Setup Utility Improvements to virtual media with the addition of USB 2.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Core Management installation, configuration, and maintenance throughout the entire server Software for ProLiant 100 lifecycle. This provides the customers with higher levels of operational Series Servers efficiency and highly reliable systems.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Boot environment and GUI Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Industry Standard Compliance ACPI V2.0 Compliant PCI 2.2 Compliant PXE Support WOL Support Microsoft® Logo certifications IPMI 2.0, DCMI 1.0.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Power Supply HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with Common Slot, High Efficiency and Right-Size Power Supplies.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Dynamic Power Capping is included with the LO100 Advanced Pack: Dynamic Power Capping - User specifies the power envelope for the 2U chassis, within the capabilities of the hardware installed. Users run a utility to calibrate the minimum and maximum power consumption envelope for the chassis.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Telco Rack Support Support for all 2-post centered and 4 post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions at: http://www.hp.com/go/rackandpower Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products.
QuickSpecs HP ProLiant DL1000 Multi Node Server Standard Features Deployment Service – Installation and Start-up only Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays. For a complete listing of service offerings and information visit: http://www.hp.com/services/proliantservices http://www.hp.
QuickSpecs HP ProLiant DL1000 Multi Node Server HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL170h G6 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools.
QuickSpecs HP ProLiant DL1000 Multi Node Server Models Eight Drive Serial ATA (SATA) 2 Node Models NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a storage controller (Smart Array P212/256MB recommended), and one HP h1000 LFF SAS CTTLR CABLE OPT KIT per controller (P/N 519503-B21). One Intel® Xeon® Processor E5504 (2.
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models Power Supplies Enablement Kits advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HP Power Advisor" is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: "www.hp.com/go/proliant-energy-efficient" or www.hp.
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models Intel® Xeon® processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800), FIO Base NOTE: If 2 processors are desired, select one 503584-L21 and one 503584-B21.
QuickSpecs HP ProLiant DL1000 Multi Node Server Configuration Information - Factory Integrated Models Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) Front Power option Storage Controllers HP h1000 Front Power Right FIO Kit HP h1000 Front Power Left FIO Kit NOTE: Each ProLiant DL170h Server comes with a rear UID, Power Button and Health LED. These options provide a front facing option that will power up to two nodes each.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information. HP DL170h Dedicated Management Port OPT Kit 575498-B21 Unique Options NOTE: Each ProLiant DL170h G6 Server comes standard with sideband support for LO100i through the shared, system NIC. Order this option (P/N 575498-B21) if a dedicated management network is desired.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit HP 4GB 2Rx4 PC3-10600R-9 Kit HP 4GB 4Rx8 PC3-8500R-7 LP Kit HP 8GB 2Rx4 PC310600R-9 Kit HP 8GB 2Rx4 PC3-8500R-7 Kit Unbuffered with ECC DIMMs (UDIMMs) NOTE: Maximum 12 DIMMs supported per node. HP 1GB 1Rx8 PC3-10600E-9 Kit HP 2GB 2Rx8 PC3-10600E-9 Kit NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options HP 300GB 6G SAS 10K SFF DP ENT HDD HP 300GB 3G SAS 10K SFF DP ENT HDD HP 146GB 6G SAS 15K SFF DP ENT HDD HP 146GB 3G SAS 15K SFF DP ENT HDD HP 146GB 6G SAS 10K SFF DP ENT HDD HP 146GB 3G SAS 10K SFF DP ENT HDD HP 72GB 6G SAS 15K SFF DP ENT HDD HP 72GB 3G SAS 15K SFF DP ENT HDD NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.
QuickSpecs HP ProLiant DL1000 Multi Node Server Core Options Communications HP NC112T PCIe Gigabit Server Adapter HP NC360T PCI Express Dual Port Gigabit Server Adapter HP NC364T PCI Express Quad Port Gigabit Server Adapter HP NC373F PCI Express Multifunction Gigabit Server Adapter HP NC373T PCI Express Multifunction Gigabit Server Adapter HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter HP NC375T PCI Express Quad Port Gigabit Server Adapter HP NC522SFP Dual Port 10GbE Server Adapter
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options Remote Management HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: For additional information, please see the Lights-Out 100i QuickSpecs at www.hp.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options Storage Controllers HPC Specific Options HP Smart Array P800 Controller HP Smart Array P800/512 BBWC Controller HP Smart Array P212 Controller HP Smart Array P212/256MB Controller HP Smart Array P212/Zero Memory Controller HP Smart Array P410 Controller HP Smart Array P410/256MB Controller HP Smart Array P410/512MB with BBWC HP Smart Array P411 Controller HP Smart Array P411/256MB Controller 381513-B21 462834-B21 462828-B21 462862-B21 4
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options HP StorageWorks Modular Smart Array StorageWorks Options MSA SAN Storage Arrays HP StorageWorks 50 Modular Smart Array NOTE: Rack-mountable 10 SFF drive enclosure with single I/O module, redundant hot plug power supplies and hot plug fans. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12245_na/12245_na.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options Uninterruptible Power Systems HP Rack Series HP Rack Options HP Rack-mountable UPS HP UPS R1500 G2 UPS HP, R1.5k VA UPS, 1U NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12507_na/12507_na.
QuickSpecs HP ProLiant DL1000 Multi Node Server Additional Options NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm USB Options USB 1.
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory HP ProLiant DL170h G6 Server NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory DIMM Type -> Registered DIMMs (RDIMMs) DIMM Rank -> DIMM Capacity -> DIMM Native Speed (MHz) -> Dual Rank (2R) 4GB 8GB 1333 1066 2GB 1333 8GB 1333 Quad Rank (4R) 4GB 1066 Unbuffered with ECC DIMMs (UDIMMs) Single Rank Dual Rank (1R) (2R) 1GB 2GB 1333 1333 SLOTS THAT CAN BE POPULATED 16 slot servers 16 16 16 16 12 12 12 MAXIMUM MEMORY CAPACITY (GB) 16 slot servers 32 64 128 128 48 12 24 1066 1066 800 1333 1333* 800 1066 800 N/
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory Chnl 1 slot # 1 2 3 CPU1 population order A; 2GB DIMM D; empty G; empty slot # 1 2 3 CPU2 population order A; empty D; empty G; empty Chnl 1 Chnl 2 4 5 6 B; 2GB DIMM E; empty H; empty 4 5 6 B; empty E; empty H; empty Chnl 2 Chnl 3 7 8 C; 2GB DIMM F; empty 7 8 C; empty F; empty Chnl 3 Standard memory plus optional memory (1 CPU model) 12GB, consisting of three (3) 2GB UDIMMs plus three (3) 2GB UDIMMs 6x 2GB dual-rank PC3-10600E UDIMM
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory Chnl 1 slot # 1 2 3 CPU1 population order A; 8GB DIMM D; 8GB DIMM G; 8GB DIMM slot # 1 2 3 CPU2 population order A; empty D; empty G; empty Chnl 1 Chnl 2 4 5 6 B; 8GB DIMM E; 8GB DIMM H; 8GB DIMM 4 5 6 B; empty E; empty H; empty Chnl 2 Chnl 3 7 8 C; 8GB DIMM F; 8GB DIMM 7 8 C; empty F; empty Chnl 3 Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration 128GB, consisting of sixteen (16) 8GB dual rank
QuickSpecs HP ProLiant DL1000 Multi Node Server Memory NOTE: Capacity references are rounded to the common Gigabyte values. 1GB = 1024MB 2GB = 2048MB 4GB = 4096MB 8GB = 8192MB Following are memory options available from HP: Registered DIMMs (RDIMMs) Memory HP 2GB 2Rx8 PC3-10600R-9 Kit HP 4GB 2Rx4 PC3-10600R-9 Kit HP 4GB 4Rx8 PC3-8500R-7 LP Kit HP 8GB 2Rx4 PC3-10600R-9 Kit HP 8GB 2Rx4 PC3-8500R-7 Kit Unbuffered with ECC DIMMs (UDIMMs) NOTE: Maximum 12 DIMMs supported per node.
QuickSpecs HP ProLiant DL1000 Multi Node Server Storage 1-8 Eight 3.5" Hot-plug SAS/SATA hard drive bays 1-16 Sixteen 2.5" Hot-plug SAS/SATA hard drive bays Drive Support Removable Media DVD-ROM DVD/CD RW Quantity Supported Up to 2 per node Up to 2 per node Position Supported External External Controller USB USB Hard Drives NOTE: The components of a storage subsystem (e.g.
QuickSpecs HP ProLiant DL1000 Multi Node Server Storage 160GB 3G SATA 7.2K Up to 8 1-8 SATA Hot Plug SFF Midline (MDL) Drives Quantity Supported 500GB 3G SATA 7.2K 16 160GB 3G SATA 7.2K Position Supported 1-16 SAS Hot Plug 3.5"Midline (MDL) Drives Quantity Supported 1TB 3G 7.2K Up to 8 750 3G 7.2K Position Supported 1-8 SAS Hot Plug 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Storage 300GB 6G SAS 10K DP 146GB 6G SAS 15K DP 146GB 3G SAS 15K DP 146GB 6G SAS 10K DP 146GB 3G SAS 10K DP 72GB 6G SAS 15K DP 72GB 3G SAS 15K DP HP Smart Array P212/256 MB Controller HP Smart Array P410/256 MB Controller HP Smart Array P410/512 MB BBWC Controller SATA Hot Plug Midline (MDL) Solid State Drives Quantity Position Supported Supported 60GB 3.0G SATA SSD 16 1-16 120GB 3.0G SATA SSD SATA Hot Plug 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Power Specifications Operational Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max. Rated VA (Volt-Amp) Efficiency (%) Power Factor Leakage Current (mA) Maximum Inrush Current (A peak) Maximum Inrush Current Duration (mS) 90Vac to 264Vac full range 47 Hz to 63 Hz 100 115 200 220 230 240 653.10 653.19 653.
QuickSpecs HP ProLiant DL1000 Multi Node Server System Specifications Power ProLiant DL170h G6 Fully Configured Fully Loaded System Input Wattage (W) Fully Loaded System Input Current (A rms) Fully Loaded System Thermal (BTU- Hr) Fully Loaded System VA (Volt-Amp) System Leakage with all power supplies loaded (mA) System Inrush Current with all power supplies loaded (A) 115V/60Hz 651 5.7 2218 657 1.58 220V/50Hz 638 3.0 2174 657 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Technical Specifications System Unit Dimensions (H x W x D) (with bezel) Weight (approximate) Input Requirements (per power supply) 3.44 x 17.64 x 28.91 in (8.74 x 44.81 x 73.43 cm) Maximum (all hard drives, power supplies, and processors installed) Minimum (one hard drive, power supply, and processor installed) Rated Line Voltage 72.00 lb (32.7 kg) 40.00 lb (18.2 kg) 90 to 140 VAC 180 to 264 VAC Rated Input Current 7.31A at 115VAC 3.
QuickSpecs HP ProLiant DL1000 Multi Node Server Technical Specifications Emissions Classification (EMC) HP Smart Array B110i SATA RAID Controller Simultaneous drive transfer channels Transfer rate synchronous (maximum theoretical) Data transfer method Drive support Data transfer modes Protocol Feature RAID levels supported RAID Features RAID OS Support DA - 13309 average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment.
QuickSpecs HP ProLiant DL1000 Multi Node Server Technical Specifications Embedded NC362i PCIe Network Interface Gigabit Server Adapter Data Transfer Method Network Transfer Rate Connector Cable Support Environment-friendly Products and Approach End-of-life Management and Recycling Integrated 10/100/1000BASE-T Transceiver Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
