Installation guide

7-22 Compaq ProLiant DL580 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: h-ch7 Server Configuration and Utilities.doc Last Saved On: 4/5/01 2:48 PM
SCO OpenServer and SCO UnixWare Device
Drivers from Compaq
To support the SCO OpenServer or SCO UnixWare operating systems, your
Compaq ProLiant DL580 server must have certain device drivers, located on
the SmartStart CD shipped with your server. The following features require
the installation of these device drivers:
■ Compaq Ethernet Token Ring Adapter
■ Automatic Server Recovery (ASR-2)
■ Compaq ProLiant Storage System
If you use SmartStart to install your operating system, these drivers are
installed automatically. Otherwise, you can use SmartStart to create UNIX
Extended Feature Supplemental (EFS) diskettes from Compaq to support a
manual installation of UNIX.
If you do not want SmartStart to configure the server, use the following
procedure:
1. Launch the SmartStart CD as previously described in this chapter.
2. Launch manual operating system configuration:
a. Select the System Configuration Utility.
b. Select the Operating System Installation option from the System
Configuration Utility main menu.
3. Follow the instructions provided for the operating system you are
installing.
4. When prompted, create the EFS diskettes.
IBM OS/2 Device Drivers from Compaq
To support the following operating systems, your Compaq ProLiant DL580
server must maintain certain device drivers, located on the SmartStart CD
shipped with your server.
■ IBM OS/2 Warp Server 4.0
■ IBM OS/2 Warp Server 4.0 SMP
■ IBM OS/2 Warp
■ IBM OS/2 Warp Connect 3.0
■ IBM OS/2 2.x