Interconnect Switch User Guide

Configuring the GbE Interconnect Switch Using the Console Management Interface
3-38 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Configuring Class of Traffic
To configure traffic class:
1. Highlight Configure Traffic of Class on the Configure Class of Service, Default
Priority and Traffic Class menu.
2. Press the Enter key. The following screen is displayed.
3. Toggle the Priority fields to set the traffic class for the eight levels of priority for the
GbE Interconnect Switch. Class values are from 0 to 3.
4. Highlight APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.