QuickSpecs

The HP ProLiant SL250s Gen8 Server with HP ProActive Insight architecture delivers even greater levels of configurability for high
performance and scale-out deployments, to help lower total cost of ownership.
Up to four HP ProLiant SL250s Gen8 nodes, in a half-width, 2U modular form factor, fit into the HP s6500 scalable system chassis. In
addition, each node can support up to three GPUs or four additional 2.5-inch small form factor hard drives.
The SL250s Gen8 Server series includes the exclusive HP SmartMemory and delivers a 25% increase in memory bandwidth to improve
performance for certain applications.
Delivering on the promise of server lifecycle automation, the SL250s Gen8 features the exclusive HP Active Health System that provides
continuous, proactive, monitoring for over 1600 system parameters with zero impact to application performance.
NOTE: The 2U Open View image below shows two SL250s side by side to denote the left and right trays. Each unit is a 2U, half-width
form factor.
2U Open View: 2U Front View:
1. Rear dual GPU placement. This location is also for the optional
SFF 2.5" hard drive kit to enable four (4) SFF HDD's in place of
the GPUs.
1. PCIe Expansion slot
2. Single GPU riser mounts and underneath is Support for two
Intel® Xeon® E5-2600 sequence processors and 16 memory
slots. This location is also for the optional SFF 2.5" hard drive
kit to enable four (4) SFF HDD's in place of the GPUs
2. Four Hot-Plug Drive Slots
3. FlexibleLOM networking option slot 3. Dedicated iLO4 Management Port
4. (1) 1GbE Ports
5. (1) 1GbE Ports
6. Power Button
7. Health LED
8. UID LED
9. Serial Port
10. SUV (Serial/USB/Video)
What's New
Updated information pertaining to availability of various options
QuickSpecs
HP ProLiant SL250s Generation 8 (Gen8)
Overview
DA - 14232 Canada — Version 33 — March 31, 2014 Page 1