User guide

Group Administration 6-11
5. Type the parameters in the area provided. Compaq Insight Manager XE
requires the following parameters for the Compaq Lights-Out
Configuration Utility:
■ -F—Full path of the RIBCL file name
■ -V—Verbose message (optional)
If the RIBCL file is in the root directory of
Compaq Insight Manager XE on the C:\ drive the parameters are:
-F C:\CIMXE20\MANAGEUSERS.TXT -V
Figure 6-8. Creating a new task
NOTE: Compaq Insight Manager XE 2.0 does not send all the required environment
variables when launching an application. CPQLOCFG.EXE requires that the “systemroot”
variable be set. This usually points to the Windows NT directory. Check your settings by
typing “SET” at a command prompt. An example:
SYSTEMROOT=C:\WINNT
Compaq Insight Manager XE 2.1b and later do not require you to set the environment
variable.
NOTE: Compaq Insight Manager XE does not allow the -L parameter to designate an
output log file. A default log file named with the DNS name or the IP address is created in
the same directory where CPQLOCFG is launched.