User guide

Appendix C
Remote Insight Board Command
Language
Remote Insight Board
Command Language
This section describes the Remote Insight Board Command Language
(RIBCL) tags, the parameters associated with the tags, and the errors that
might occur if an invalid action is requested. Each of the tags, along with their
respective parameters and error codes, are discussed in this guide and are
listed in the following sections.
IMPORTANT: Comments should not interrupt a command. An error message will be
generated in this case.
NOTE: The commands listed in this document are based on the 2.40 firmware update. If
you have not done so already, download the 2.40 update from the Compaq website at
www.compaq.com/lights-out
NOTE: Due to functional changes and the expansion of the command language, the 2.40
update is not backwards compatible with earlier versions of firmware. To update a RILOE
board that is on firmware version 2.32 or earlier, you must use a browser or ROMPaq.
NOTE: The commands for firmware version 2.40 should not be used on a RILOE board
containing the firmware version 2.32 or prior. The commands for firmware version 2.32 or
prior should not be used on a RILOE board containing the 2.40 firmware update.