User guide
Configuring the Remote Insight Lights-Out Edition 4-11
Compaq Confidential – Need to Know Required
Writer: James Parish Project: Compaq Remote Insight Lights-Out Edition User Guide Comments:
Part Number: 159206-005 File Name: e-ch4 Configuring the Remote Insight Lights-Out Edition.doc Last Saved On: 7/10/01 4:16 PM
Relevant Files
The following file supports the Remote Insight Lights-Out Edition board:
CPQRIB.SYS
You can install or update the Compaq Remote Insight Lights-Out Edition
driver by following the instructions in the next section.
Installing or Updating the Compaq Remote
Insight Lights-Out Edition Drivers
The setup program in the \CPQSUPSW\NTSSD subdirectory of the SmartStart
and Support Software CD installs, updates, or removes Windows NT device
drivers. When installing or updating drivers, the setup program copies the
appropriate driver to the system and configures the system to use that driver.
The setup program also provides current driver status and version information.
If you are updating the Remote Insight drivers, ensure that the Remote Insight
Lights-Out Edition board is running the latest version of the Remote Insight
Lights-Out Edition firmware. The latest firmware can be obtained through
ROMPaq from the Compaq website:
www.compaq.com/lights-out
Follow the Setup menu through the following levels: Support, Compaq
SoftPaqs, and Servers, then select your operating system.
Follow these steps to install or update the drivers needed for the Remote
Insight Lights-Out Edition board:
1. Start Windows NT and log in to an account with administrative
privileges.
2. Insert the SmartStart and Support Software CD into the CD-ROM drive.
3. Select Run and enter the following command:
[CD Drive]:\CPQSUPSW\NTSSD\SETUP
4. Select the Express option. The Setup program presents a list of drivers
that can be installed, such as:
GCompaq Remote Insight Lights-Out Edition Driver
GCompaq Systems Management Driver
GATI Video Controller