User guide

4-12 Compaq Remote Insight Lights-Out Edition User Guide
Compaq Confidential – Need to Know Required
Writer: James Parish Project: Compaq Remote Insight Lights-Out Edition User Guide Comments:
Part Number: 159206-005 File Name: e-ch4 Configuring the Remote Insight Lights-Out Edition.doc Last Saved On: 7/10/01 4:16 PM
5. Select Systems Management Driver to install or update the driver.
Ensure that the Remote Insight driver is selected.
IMPORTANT: During a Windows NT installation of the Remote Insight Lights-Out Edition
board using SmartStart, do not select Compaq Remote Insight WAN Driver
(RIBWAN.SYS) for installation. The Remote Insight Lights-Out Edition board does not use
or support RIBWAN.SYS. Installation of RIBWAN.SYS may cause server performance
problems.
6. If a Remote Insight Lights-Out Edition board is present in the system,
Remote Insight Lights-Out Edition drivers will be installed when you
click OK.
7. Exit the setup program and restart the system to load the drivers you
installed.
NOTE: You must also install the ATI video controller driver for correct video operation
through the Remote Insight Lights-Out Edition board. This driver is on the SmartStart and
Support Software CD.
Windows 2000 Driver Support
The device drivers for Windows 2000 can be obtained from the SmartStart and
Support Software CD, 4.70 or later. You also can download the Compaq
Support Paq for Windows 2000 from the Compaq website:
www.compaq.com/support/files
To install the Support Paq, run the SETUP.EXE file included in the download
and follow the installation instructions. For additional information about the
Support Paq installation, read the text file included in the Support Paq
download.
NetWare Driver Support
The Remote Insight Lights-Out Edition driver for NetWare is CPQRI.NLM.
This driver enables you to access the Remote Insight copy of the Integrated
Management Log or Critical Error Log remotely, even when the server is
down. CPQRI.NLM is notified if any subsequent events occur and then
updates this copy of the log.
NOTE: If you load the Server Health driver, CPQHLTH.NLM, before the Remote Insight
driver, CPQRI will copy the contents of the Integrated Management Log or the Critical
Error Log (based on the support provided by the server) to the Remote Insight Lights-Out
Edition board during initialization.