User guide

Configuring the Remote Insight Lights-Out Edition 4-13
Compaq Confidential – Need to Know Required
Writer: James Parish Project: Compaq Remote Insight Lights-Out Edition User Guide Comments:
Part Number: 159206-005 File Name: e-ch4 Configuring the Remote Insight Lights-Out Edition.doc Last Saved On: 7/10/01 4:16 PM
To install CPQRI.NLM :
1. Insert the Compaq Management CD into the CD-ROM drive of the
server. NetWare 5 will automatically mount the CD as a volume. For
NetWare 4.x servers, use the following command at the server console:
LOAD CDROM.NLM
CD MOUNT volume name
2. Load NWCONFIG.NLM for NetWare 5 or INSTALL.NLM for NetWare
4.x.
3. Select Product Options. Install a Product Not Listed and enter the
following path to the driver:
VOL NAME: CPQSUPSW\NSSD
4. The Compaq Software Support Utility will load and the Remote Insight
Lights-Out Edition driver can be installed from the menu.
The following is an alternate installation method:
5. Insert the SmartStart and Support Software CD into the CD-ROM drive
of the workstation.
6. Execute a MAP command, similar to the following example, to ensure
thatyouhaveapathtotheserver.
MAP G:=SYS:SYSTEM
7. Copy the NetWare Remote Insight driver to the server, using the
following path.
COPY D:\CPQSUPSW\NSSD\SRV_MGMT\CPQRI.NLM G:
8. Return to the server console to complete the installation of the Remote
Insight driver support for NetWare.
9. Use the NetWare INSTALL program or NWCONFIG for NetWare 5 to
modify the AUTOEXEC.NCF file. Add the following LOAD commands
so the driver is loaded each time the NetWare server is restarted. It is not
necessary to load the Server Health driver if it is not supported on your
server.
LOAD CPQHLTH
LOAD CPQRI
For a description of CPQRI initialization errors and remedies, refer to the
online help for the Remote Insight Lights-Out Edition board on the Compaq
Management CD.