User guide

4-14 Compaq Remote Insight Lights-Out Edition User Guide
Compaq Confidential – Need to Know Required
Writer: James Parish Project: Compaq Remote Insight Lights-Out Edition User Guide Comments:
Part Number: 159206-005 File Name: e-ch4 Configuring the Remote Insight Lights-Out Edition.doc Last Saved On: 7/10/01 4:16 PM
OS/2 Driver Support
The device drivers for IBM OS/2 can be obtained from the SmartStart and
Support Software CD by using the Diskette Builder utility.
The Remote Insight Lights-Out Edition driver for OS/2 is CPQRIB.SYS.Ifthe
Compaq Wellness driver for OS/2, CPQHLTH.SYS, is loaded, then
CPQRIB.SYS is notified of any critical events, and the driver updates its copy
of the critical error log. CPQRIB.SYS also updates its critical error log every
time the board is reset.
If the Compaq BIOS32 support driver for OS/2, CPQB32.SYS, is loaded, then
CPQRIB.SYS is notified of any updates to the Integrated Management
Log (IML), and the driver updates its copy of the IML. CPQRIB.SYS also
updates its copy of the IML every time the board is reset.
NOTE: The Remote Insight Lights-Out Edition driver for OS/2, CPQRIB.SYS, 2.0 and later,
supports the Integrated Management Log and requires the use of the Compaq BIOS32
support driver, CPQB32.SYS.
To install CPQRIB.SYS:
1. Insert the diskette labeled “System and Storage Drivers” in the diskette
drive of the server.
2. From the command prompt, type
DDINSTAL and press the Enter key.
Alternatively, on the OS/2 Desktop, open the folders OS/2 System,
System Setup,andInstall/Remove. Double-click Device Driver
Install. Change the Source Path to \CPQRIB.
3. Select the Compaq Remote Insight Lights-Out Edition entry and
click Install.
4. In the Install/Remove folder, double-click Device Driver Install and
change the Source Path to \CPQB32.
5. Select the Compaq 32-Bit Helper Driver entry and click Install.
6. Perform an orderly shutdown and reboot the server for the driver
installation to take effect.