Technical data

Maintenance Procedures 67

c. Enter the requested information at the prompts, pressing Enter after

each entry:

–

Server Name or IP Address [host]:

Name or IP address

of computer on which configuration file is located.

–

User Name [user]:

–

File Name [/usr/switch/firmware]:

Filename or

absolute path of configuration file.

–

Protocol (RSHD or FTP) [rshd]:

Press Enter to use

RSHD, or enter FTP to use FTP protocol.

–

Password:

Enter the FTP password (only displays if FTP

protocol was selected).

d. Reboot the switch by entering the following at the prompt and pressing

Enter:

reboot

e. Re-enable the switch by entering the following:

switchEnable

16.If no previous switch configuration was downloaded, or the switch

configuration from the previous switch contained a modified Fabric

Watch profile and you want to revert to the default settings, download the

FC 6164 Fabric Watch profile to the new switch.

a. Ensure that the profile is available on the workstation or network.

b. Disable the switch by entering the following:

switchDisable

c. Enter the following at the Telnet prompt to download the profile from

the server to the switch:

configDownload

Several prompts display to gather information about the file being

downloaded