User`s guide

DLT MiniLibrary (TL891) - User’s Guide
2–24 EK–TL891–UG. A01
Figure 2-22 Confirmation Screen
As the confirmation screen indicates, to execute the load or unload, press the
Enter
button. If the confirmation screen does not show your intended source and
destination, press the
Escape
button to return to the ‘From’ entry screen.
When you press the
Enter
button, the screen shown in Figure 2-23 appears. If the
source is a drive, the word ‘Unload’ appears in place of ‘Load’ on line 4.
Figure 2-23 Load/Unload ‘In Progress’ Screen
When the load or unload operation is finished, the Default Screen reappears.
Note that in Figure 2-24, the screen has been updated to show that there is now a
cartridge in DLT0, and Slot4 is empty.
Figure 2-24 Updated Default Screen
From: Slot4 To:DLT0
ENTER To Execute
ESCAPE To Cancel
From: Slot4 To:DLT0
Load In Progress
Dlt0 Idle
Dlt1 Idle
Loader Idle
0 1 2 3 _ 5 6 7 8 9