User`s guide

Configuration Restrictions

You can not have the Compaq VAX™-SCSI option in your system at the

same time as the KZQSA Q-Bus SCSI adapter. If this module is in your

system, it must be removed if you want to run the VAX-SCSI adapter.

Compaq VAX™-SCSI Installation Procedure

The table below provides an overview of the VAX™-SCSI installation

procedure.

1. Touch a metal piece of the system enclosure or power supply

2. Disconnect the SCSI cable from the CPU module

3. Remove the CPU module from the system.

4. Remove an unused I/O bulkhead handle from the system, and

replace it with the VAX™-SCSI I/O handle provided with

your kit. Route the SCSI cable from the VAX™-SCSI I/O

bulkhead from the I/O section of your enclosure to the CPU

area. You will need to be sure the cable routing does not

interfere with any system options.