User's Manual

uSign User Manual
7.3 One byte commands
7.3.1 Stop Capturing
Command string: C0
Response string: C0
7.3.2 Start Capturing use FBP format 1
Command string: C1
Response string: C1
7.3.3 Start Capturing use FBP format 2
Command string: C2
Response string: C2
7.3.4 Turn red led on
Command string: C3
Response string: C3
7.3.5 Turn red led off
Command string: C4
Response string: C4
7.3.6 Clear CMP format mode data
Command string: C5
Response string: C5
7.3.7 Get data 0x00
Command string: C6 or D4 or D5
Response string: 00
7.3.8 Start Capturing use CMP format
Command string: C7
Response string: C7
7.3.9 Reset points counter
Command string: D0
Response string: D0
7.3.10 Get point counter high byte
Command string: D1
Response string: D1
7.3.11 Get point counter low byte
Command string: D2
Response string: D2
Copyright © 2006, International Technologies & Systems Corp. All rights reserved.
Page 14 of 18