User's Manual

uSign User Manual

FCC WARNING STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation of this device is subject

to the following conditions: this device may not cause harmful interference and this

device must accept any interference received, including interference that may cause

undesired operation.

CANADIAN DOC STATEMENT

This digital apparatus does not exceed the Class B limits for radio noise for digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de las classe B prescrites dans le

Réglement sur le brouillage radioélectrique édicté par les ministère des

Communications du Canada.

CE STANDARDS

An independent laboratory performed testing for compliance to CE requirements. The

unit under test was found compliant to Class B.

ID TECH is a registered trademark of International Technologies & Systems

Corporation. uSign, and Value through Innovation are trademarks of International

Technologies & Systems Corporation.

USB (Universal Serial Bus) Specification is Copyright by Compaq Computer

Corporation, Intel Corporation, Microsoft Corporation, and NEC Corporation. Windows,

Excel, & Notepad are registered trademarks of Microsoft Corporation.

Page 2 of 18