Installation guide

Adaptec AHA-1540B, AHA-1542B,

AHA-1542C, AHA-1542CF,

AHA-1542CP HBAs

Solaris Device Driver:

aha

Device Type:

SCSI

Adapters:

Adaptec AHA-1540, AHA-1542B, AHA-1542C,

AHA-1542CF, AHA-1542CP

Bus Type:

ISA

Preconﬁguration Information

Adaptec AHA-1542C and AHA-154CP only: Use default conﬁguration parameters

in both basic and advanced modes.

Adaptec AHA-1540CF only: The DMA transfer rate should be left at the default

unless your motherboard supports higher rates.

Supported Settings

• IRQ Level: 9, 10, 11, 12, 13, 14, 15

• I/O Address: 0x330

• DMA Channel: 6

AHA-1542C, AHA-1542CF, and AHA-1542CP only:

• Synchronous Negotiation: Disabled for each CD-ROM drive target

• Support for More Than Two DOS

Drives:

Disabled

• Dynamically Scan SCSI Bus for BIOS

Devices:

Disabled

10-22 Information Library for Solaris 2.6 (Intel Platform Edition) ♦ August 1997