Product Label

10 11
Outside of Structures
This product can be used around wood to control
wood-infesting insects and other pests. Make applica
-
tions with a 0.6% emulsion with a fan spray at a maxi-
mum of 25 psi to run-off.
If pests are found inside fence posts, trees or utility
poles, locate the area of infestation by drilling. Inject a
0.6% emulsion. For treating bees, hornets, wasps, and
yellow jackets, direct contact works best; apply in the
late evening when pests are at rest. For best results,
apply a saturated spray solution directly into the nest in
the ground or in bushes, or in crack and crevice areas.
Pests Under Slabs
To control Ants, Cockroaches and Scorpions which live
under slab areas, drill and inject 0.06% to 0.12% emul-
sion per 10 square feet or 2 gallons of emulsion per 10
linear feet. One gallon of emulsion should be used. Ap-
plication may also be made by horizontal rodding and
then injection of 1 gallon of this emulsion.
How to Calculate the Active Ingredient Content of
the Finished Spray Mixture
Use the following equation to calculate the percent
active ingredient that is in the spray tank after mixing
this product:
(7.9) X (Fl. Oz of this product
added to the tank)
=
Percent
Active
Ingredient
of spray
mix
(Gallons of nished spray
mix) X (128)
LAWN AND
ORNAMENTALS
GENERAL APPLICATION INSTRUCTIONS
This product may be applied in the following areas to
control a wide spectrum of insects and mites:
• Interiorscapes (such as hotels, shopping malls,
ofce buildings)
• Outdoor Plantscapes (such as around residential
dwellings, ornamental gardens, parks, institutional
buildings, recreational areas, athletic elds and
home lawns)
This product may be applied to the following plants:
Trees, Shrubs, Foliage plants, Non-bearing fruit and
nut trees (that is, perennial crops that will not produce
a harvestable raw agricultural commodity during the
season of application), Flowers.