Product Label

26 27
PESTS CONTROLLED
SPECIFIC APPLICATION INSTRUCTIONS
Use a 0.02 to 0.06% emulsion as a residual spray
in a spray volume of up to 10 gallons of emulsion
per 1,000 square feet. For thorough coverage of
plants with dense foliage, use the higher application
volume.
The higher rate should be used for heavy pest infes
-
tation, quicker knockdown or longer residual control.
Repeat applications at no more than once every
seven days under severe insect infestation or if
insects return.
Barrier Treatment: To prevent infestation of build-
ings, apply to a band of soil and vegetation 6 to 10
feet wide around and adjacent to the building. Apply
from the base of the foundation to 2-3 feet above the
foundation. Use dilutions of 0.33 to 1.0 uid oz. of
this product per 1,000 square feet in sufcient water
to provide adequate coverage (refer to Perimeter
Application Dilution Chart).
• Ants and Fire Ant Mounds
SPECIFIC APPLICATION INSTRUCTIONS
Use this product at a dilution of 0.06% emulsion.
Apply using the Drench Method by applying 1 to 2
gal. of nished spray to each mound area by sprin
-
kling the mound until it is wet. Treat a four-foot diam-
eter circle around the mound. If the mound diameter
is greater than one foot, use the higher volume. Op-
timum results are achieved if applications are made
during cool hours of the day.
• Mosquitoes
SPECIFIC APPLICATION INSTRUCTIONS
Use a dilution rate of 0.33 to 1.0 uid oz. of this prod
-
uct per gallon of water. Apply one gallon of emulsion
per 1,000 square feet to treat around landscapes,
lawn and buildings. If applications at higher volume
are required, dilute this product at lower concentra-
tions and apply at greater volumes to deliver the
desired amount of product per area (refer to the Or-
namental or Perimeter Application Dilution Charts).