Product Label

6 7
ANT CONTROL
PEST LOCATION RATE
Nuisance Ants
Outdoors
Carpenter Ants
Outdoors
REMARKS
Locate and treat ant nests where possible. Apply
where ants have been seen or would be expected
to look for food. Apply to the perimeter using
the applications described in the “Pest Control
on Outside Surfaces and Around Buildings”
instructions. Higher dilutions and/or volumes may
be required when treating concrete surfaces.
• Non-porous
surfaces
0.5 – 1.0 . oz in one
gallon of water.
Apply one gallon per
1,000 square feet.
REMARKS
Low volume application.
The following procedures must be
followed to help achieve maximum
control of the pest: Treat non-porous
surfaces only in areas protected from
rainfall and spray from sprinklers with
low volume applications using 0.5 to 1.0
. oz of product per gallon of water and
applying this dilution at the rate of one
gallon per 1,000 square feet.
• Porous
surfaces and
vegetation
0.5 – 1.0 . oz per
1,000 square feet
REMARKS
High volume application. Refer to
Ornamental and Perimeter Application
Dilution Chart.
• Maximum
residual
control
0.5 – 1.0 . oz per
gallon of water.
Apply up to 10 gallons
per 1,000 square feet.
(continued)