Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. 2013 Santa Fe Base radio 2013 Santa Fe 4.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. - Follow installation manual instructions carefully. Installer must careful to not cause interference between Navigator System c abling and active / passive car safety device (Ex: Air bags, seat belts, indicators, etc…) - Turn OFF the radio.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Table of contents: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Bill of materials Main Touchscreen (Pre-installed into Fascia molding) TRIP Module and two screws Fascia Molding SD Card (Pre-inserted into Ext.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. AUDIO SWITCHER Audio Patch Cord: - AUX IN (previous page) to Audio Switcher input jack. - Steering wheel control wires (2 pin from TRIP SERIAL Cable (P:7).
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Protect the vents surrounding area with masking tape to prevent surface damage as shown.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Carefully pry away the vent towards you starting at the bottom of the vent to gain enough to begin removing by hand. Store the vents pieces carefully to avoid damage. Repeat the process for the other side.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Once both vents are removed , the radio securing screws are exposed. Remove both screws and reserve. Repeat on the other side.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Gently ease the radio forward to expose the rear.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Disconnect the FM and XM antenna from the rear of the radio. Caution, press the locking tab after the pink plastic to disengage the XM antenna. A little flat screw driver may help.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. The red lines identify the area that needs to be trimmed. The factory radio will be located deeper in the dash than before to accommodate the new touchscreen and bezel mount.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Bend all the way down the radio supporting bracket as shown. Doing this ensures enough clearance to position the cables under the radio at final assembly.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Remove the securing clip from the car harness. Doing this will ensure enough clearance at the back of the radio at final assembly.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Remove existing retaining brackets using a Phillips head screwdriver. Secure the 4 screws removed.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Remove the 6 front panel retaining screw as shown. (2 opposite side) To detach the front panel completely from the radio, there are 8 retaining tabs that retain the radio panel in ( 2 on bottom, 2 on top and 2 either side) .
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Once the panel is free of the chassis, we need to remove the ribbon cable. Notice the ribbon cable connection. There are locking tab cutouts on the ribbon cable to ensure the cable stays in place.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. A little pressure is needed from a screwdriver to lift up the brown locking tab to allow the connector to freely be disconnected. Be gentle to avoid damaging the brown locking tab Notice the red circles.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Remove the 2 screws holding the CD player as indicated here and save these separately because they are smaller.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Assemble the trip module with the supplied screws as indicated.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Run the flat ribbon thru the new face plate carefully. Make sure not bend the flat ribbon. Then assemble the new face plate and locate it using the embosses circled. Screw (3) the face plate starting by the opposite corners to make sure the radio body is square.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. 1 3 2 2 1- The black locking tab in the TRIP module is carefully lifted to allow the ribbon cable to be installed into the TRIP module. 2- The flat ribbon contacts (silver) need to be facing down (to make contact) and the blue needs to face up.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. The protruding curve of the ribbon cable must be CAREFULLY eased back into the radio unit (under the TRIP module), use just enough pressure to push into the radio. Completed TRIP module ribbon cable installation.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. TOP Attach the dash mounting brackets to the side of the radio using the 2 mounting points. Alignment the bracket in dimple (GREEN circle) to locate the brackets correctly. These are supplied in the installation kit.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Open the glove box and rotate the guides (1) and remove them. Disconnect the cylinder (2) to completely release the glove box.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Apply 2 strips of double sided tape at the back of the external media box as shown or use the supplied screws.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Route the External Media Storage connector under the radio location. Peel the red tape from the double face tape and affix as shown. Affix the Media box against the left inner wall and 2” from the face as shown. Secure the storage cord beside the air filter box.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. In the following section we will: - Prepare the Audio Patch Cord for the final assembly - Attach the Audio Patch Cord to the car & radio connectors - Parts Required: - Video Tutorial about this section: https://dl.dropboxusercontent.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Attach the TRIP Serial cable 2 Pin connector to this connector to the Audio Patch cord as shown.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Attach the AUX cable male jack into the female of the Aux switcher board as shown. Secure in place with Electrical tape.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Connect the Audio Patch cord to the car matching connector as shown. Connectors improperly seated. Connectors properly seated. You should hear a CLICK.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Reserve the CN-M5 4 pins square connector for the final assembly. Attach the TRIP SERIAL to the MAIN I/O 1 TRIP SERIAL. (Ref: P:11) Reserve the TRIP MOD cable for the final assembly.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Mini speaker installation The recommended placement of the mini-speaker is located on the driver side. Air vent Using the provided screw, attach the mini speaker to the side kick panel as shown. The speaker is very light and require only one screw.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Location of GPS antenna in the dashboard Using 3M tape attach the GPS antenna above the air duct underneath the dashboard surface. “GPS” letters of the antenna should be towards the sky. Testing has shown that signal is very good at this point.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. IMPORTANT Before proceeding to the final installation if you have purchased the following options, please proceed to their installation before completing the final assembly. - Backup Camera - Parking Assist System - RDS Traffic Tuner Appendix 1 page 66 (Santa Fe 4.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Prior the assembly of the trim to the car, please make sure you have at least the following connected properly .
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. After ensure all cables are correctly brought through to area beneath radio, attach: - Radio antenna - XM antenna - Factory reverse camera - Multi-way connectors (2) - Audio Patch cord goes into the first spot. And install radio in dashboard.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Prior installing the fascia, connect the TRIP cable to the TRIP module as indicated (5 PINS) and Parking Assist System cable (3 PINS) if purchased. Getting ready to attach the new fascia trim, connect: - Keypad green cable to the TRIP module.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Install the facia temporarily in place and plug back the wires to the battery and test run the CN-M5 navigator.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. For proper radio operation, the correct car type needs to be selected. Go into the CN-M5 Setting Panel, Select TRIP and at the bottom change accordingly as below. Failing to do this may result into a TRIP.DLL FAILED TO LOAD message. 2013+ : Santa Fe – CAR TYPE 26 2013+ 4.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Appendix 2: Backup Camera install Attach the BLACK wire from MAIN I/O 1 “REAR PWR” to the radio front bottom screw as shown (Ground) .
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Attach the RED wire from MAIN I/O 1 “REAR PWR” to the backup camera RED wire.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Appendix 3: Parking Assist System Connection of the Parking Assist System is OBD II Connector very simple.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Plug the Parking Assist connector into the car’s OBD located right underneath the driver crash pad in the middle. Once inserted, lock it in place by moving the yellow tab until you hear a “click”. Note: Please advise your dealer about this sensor and how to proceed to remove it.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Connect the female TMC FM adapter to the car male. FM RDS TMC Connect the male TMC FM adapter to the back of the radio. Reserve the white connector MAIN I/O 2 for the final assembly.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Appendix 4 4.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. 1- Prior Installing the trip module into the radio chassis, connect the trip module video & signal cable at the back of the trip module as shown. Then guide the trip module inside the radio body, make sure all the wires are directed to the front of the radio chassis.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. To ease your work, have the radio body sitting on the dashboard surface on top of the radio opening. Avoid surface damage by laying down a protective layer under the radio body! Locate the Red wire with Black stripes at the location shown.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Locate the Orange wire coming out from the radio labeled R. CAM12V IN and insert the flat terminal into the T-TAP terminal all the way in.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Locate the male Yellow RCA labeled R.CAM OUT from the radio body and plug into the MAIN I/O 1 REAR CAM cable. Secure with electrical tape. Locate the Red wire labeled R.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Locate the BLACK wired terminal of the MAIN I/O 1 labeled REAR PWR and attach the terminal to the lower middle threaded hole of the radio chassis using one of the screws removed from the factory faceplate. Once this step completed, return to the section you came from.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech. Tips and tricks To avoid over heating wire and connectors, it is recommended you use soldering acid Flux. This will greatly improve the quality of the soldering points.
Santa Fe CN-M5 Installation manual Caution – Documentation is an aid to successful installation. No liability is assumed for incorrect installation. If unsure of expertise required, please consult a qualified installation tech.
