User manual

Hexacopter（X, + and Y6）

Notice: The outer-race motors are top-motors M1, M3 and M5 of Y6 copter; inter-race are

bottom-motors M2, M4 and M6.

Octacopter(X, + and X8）

Notice: The outer-race motors are top-motors M1, M2 M3 and M4 of X8 copter; inter-race are

bottom-motors M5, M6, M7 and M8.

Calibration Mode

Compass Calibration

 Please make sure GPS wiring and all the channels set up properly in your RC transmitter.

 Cancel all trims on radio before calibration and throttle stick down.

 Rapidly flick the Flight Mode Switch(Channel 5) until purple flashing on LED

 Zero throttle then rapidly altering Mode Switch, LED solid green to enter Compass

Calibration.

 Horizontally rotate the aircraft, LED blue slow flashing indicates horizontal calibration

completed. Show as below: