User manual

Table of Contents
iii
Introduction to the Octal T1-10/100 RIOP 1
Chapter 1 - Network Installation 2
Connecting the Octal T1-10/100 to the Ethernet 2
Connecting the Octal T1-10/100 to a T1 Line 2
Connecting a Management Console 3
Powering Up the Router 3
Chapter 2 - Quickstart Instructions 4
ETHERNET INTERFACE CONFIGURATION 4
IP Protocol 4
Required for IP 4
Suggested for IP 4
IPX Protocol 5
Required for IPX 5
Suggested for IPX 5
AppleTalk Protocol 5
Required for AppleTalk 5
Suggested for AppleTalk 5
DECnet Protocol 5
Required for DECnet 5
Suggested for DECnet 5
WAN I
NTERFACE CONFIGURATION 6
T1 Physical Communications Settings 6
Required for Dedicated Line Operation 6
Suggested for Dedicated Line Operation 6
PPP Configuration 6
WAN Link Configuration 6
Required for Dedicated Line Operation 6
Suggested for Dedicated Line Operation 6
IP Protocol 6
Required for IP 6
Suggested for IP 6
IPX Protocol 7
Required for IPX 7
AppleTalk Protocol 7
Required for AppleTalk 7
DECnet Protocol 7
Required for DECnet 7
Suggested for DECnet 7
Frame Relay Configuration 7
WAN Link Configuration 7
Required for Dedicated Line Operation 7
Suggested for Dedicated Line Operation 8
Frame Relay DLCI Mappings 8