User Manual

Page 34
Step 4:
Configuring the wireless network screen
appears.
The client device found NP25G and
negotiating with NP25G to do the
registration.
Step 5:
The Wireless Configuration Completed
page displays, indicating that
configuration was successfully.
Click on the Finish button to exit the
page.
On NP25G the WSC light indicator will
change to flash slowly at a rate of
about 1 flash per second.
This indicates client registration has
completed successfully.
WSC light indicator status
Action Light indicator status Remarks
After pressed once. WSC light flash fast at a rate of
2 to 3 flashes per second.
Indicates One-Touch-
Registration is activated
a) No respond from client
after 2 minutes.
Or
b) Client JumpStart application
started but failed to
complete.
Or
c) More than one client try to
register at the same time.
Light flashes 5 times and paused
for 1 second and repeat.
Status will display for about
2 minutes before it turn off.
Indicates registration failed